User Manual

163
k
10.3 SERVO mode
SERVO mode is a simple slave mode without or with
complete pre-flash suppression in which the slave
flash unit always triggers a flash as soon as the
camera flash unit receives a light pulse.
In SERVO mode, only manual flash mode is possi-
ble. Manual flash mode is automatically activated
after switching to SERVO mode.
When the flash of the camera AF illuminator emits
the auto focus servo operation is not possible.
Disable the AF measuring beam on the camera
Use a different AF mode of the camera or switch to
manual focusing.
10.3.1 Setting SERVO flash mode
• Press the  button and the drop-down
menu will appear.
• Use the  buttons to select the
operating mode.
• Press the
°  button and confirm the selected
operating mode.
The mode of operation is adopted.
If desired, partial light output can be set,
see 10.3.3.
SERVO
MODE
SLAVE
SERVO
F1
P 1/1
SERVO
+