Specifications

MEV™ Mini HUMMER HX™ OWNERS MANUAL

To correctly secure the seatbelts, pull the metal tab out away from the retractor and insert

into one of the two the buckles located in the centre of the seats. When the belt is securely

connected a ‘click’ will be heard. Properly adjust and ensure a snug fit by pulling the

shoulder portion upward. The retractor will lock the belt during sudden stops. It may also

lock if the person leans forward too quickly. Slow, easy motions will allow for free travel.

To release the safety belt, press the buckle release button and allow the belt to retract. If

the belt does not fully retract you must check for kinks or twists in the belt.

 Always operate the cart with seat belts properly fastened.

 Make sure the seat belts are latched securely and are free from twists or kinks.

 Position the shoulder belt across the top of the shoulder and over the chest. Do not

place the shoulder belt under an arm.

 Loose fitting safety belts significantly reduce protection. Keep belts snug and positioned

low on the hips.

 Do not exceed the recommend number of occupants for the cart.

 Maximum occupants rating is two persons.

 Inspect the safety belt webbing and hardware periodically. Check for cuts, frays or loose

parts. Replace components if excessive wear or damage is noticed.

 Keep safety belts clean and dry. To clean, use mild soap and warm water. Do not use

bleach, dye or abrasive cleaners as this will weaken the belt webbing material.

 Do not insert any foreign objects into the retractor mechanism. Periodically check for

smooth operation and replace if the mechanism is not operating properly.

WARNING

CAUTION