Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 12
System Startup
Before duplicating can begin it is necessary to review a few details.
• Plug one end of the supplied power cord into the upper receptacle at the
rear of the unit.
• Next, verify that the voltage selector switch is set correctly. It is located
between the two power receptacles. The CD-3000 supports both 115
VAC and 230 VAC at 50 ~ 60 Hz. Please confirm that the appropriate
voltage (115 VAC for North America) has been selected.

CAUTION
Always use properly grounded receptacles or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.