Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 14
Loading A Disc
• After the CD-3000’s power has been switched on, press the eject button
on the front of the recorder to open its disc tray.
• Load by carefully placing the disc (label side up) into the recessed area
of the disc tray, so that the disc lays flat.
• Press the eject button on the front of the recorder to close the disc tray.
Removing A Disc
• While the CD-3000’s power is still switched on, press the eject button
on the front of the recorder to open the disc tray.
• After the disc tray has completely opened, lift the disc by its edges and
carefully remove it.
• Press the eject button on the front of the recorder to close the disc tray.