Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 15
General Operation
In addition to Relay Mode copying, the 3000 Series is extremely versatile
and offers many useful and powerful features.
Function Keys
Various uses for the 3000 Series will be explained throughout this
Operator’s Guide. The following section explains the purpose of the
function keys.
The numeric keys on the keypad have special functions when the main
operating screen is displayed:
S E L E C T C O P Y O R C O M P A R E
• Press the “0” key on the keypad. The screen will now read:
M O D E : C O P Y = 1 , S I MU L A T E = 2
The factory setting for this function is “copy”. The “simulate” mode
is a diagnostic tool that is useful for testing the readability of a master
disc, without actually writing to blank discs loaded into the recorder.
It is also helpful for training purposes, and for experimenting with
various system functions.
• Press the “1” key to select “copy” or the “2” key to select “simulate”.
After pressing either key, you will be returned to the main operating
screen.
• Press the “1” key on the keypad. Something similar to the following
will be displayed on the screen in sequence:
A N T S A 1 . 0 0 4 n 0 7 / 3 1 / 0 2
S O F T
W
A R E R E V ( C A R D 1 B )
This is the version information of the firmware currently installed on
the 3000 Series.
I M A G E S I Z E 2 5 5 MB
T I M E : 1 2 : 1 9 D A T E : 0 7/0 8/ 0 2