Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 16
The size, creation date and time of all the hard disk images stored in
the 3000 Series are displayed in sequence. If the Multiple Images
feature is “disabled”, the size of the current hard disk image is
displayed.
V E R I F Y A F T E R C O P Y
S Y S T E M O P T I O N S
This displays the Verify After status of the 3000 Series. The Verify
After function will verify a copied disc against the master that it was
burned from immediately after being copied.
M U L T I P L E I MA G E S
S Y S T E M O P T I O N S
This displays the Multiple Images status of the 3000 Series.
I N S T A L L E D ME MO R Y : 1 0 2 0 MB
S Y S T E M O P T I O N S
This displays the installed memory of the 3000 Series.
T O T A L G O O D : B A D :
S Y S T E M O P T I O N S
This is the 3000 Series’ internal counter. It keeps track of the number
of good and failed copies made by the unit since it was first
activated.
Press the “2” key on the keypad. You will see several
functions scroll across the screen. Select a function by pressing the
corresponding number on the keypad. Enable or disable the function by
pressing the “START/YES” or “STOP/NO” key.
0 = V E R I F Y A F T E R C O P Y
S E L E C T O P T I O N
The factory setting for this function is disabled. When enabled, the
Verify After feature automatically compares discs to the master disc or
hard disk image after copying is completed. Due to the nature of the
various compact disc formats, only CD-ROM Mode 1, CD-ROM Mode
2, CD-ROM XA Mode 2 Form 1, and audio (CD-DA) discs can be
compared.