Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 23
Creating Multiple Hard Disk Images
The Multiple Images feature allows the CD-3000’s internal hard disk to
store up to four master disc images. The factory setting for this function is
“disabled”. To enable it, and create multiple image files, proceed as
follows:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Press the “2” key. The screen will now read:
0 = V E R I F Y A F T E R C O P Y
S E L E C T O P T I O N S
1 = M U L T I P L E I MA G E S
S E L E C T O P T I O N S
2 = C L I C K D E T E C T I O N
S E L E C T O P T I O N S
3 = C O P Y P R O T E C T I O N
S E L E C T O P T I O N S
• Press the “1” key to select multiple images. The screen will now read:
M U L T I P L E I M A G E S MO D E
S E L E C T O P T I O N
• Press the “START/YES” key to enable “Multiple Images”.
M U L T I P L E I M A G E S S E L E C T E D
S E L E C T O P T I O N
• You will then be returned to the main operating screen:
S E L E C T C O P Y O R C O M P A R E
• Press the “COPY” key. The screen will now read:
F R O M H D ?
• Press the “STOP/NO” key. The screen will now read:
C O P Y T O H D ?