Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 25
Enabling Verify After
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Press the “2” key and the screen will now display in sequence:
0 = V E R I F Y A F T E R C O P Y
S E L E C T O P T I O N S
1 = M U L T I P L E I MA G E S
S E L E C T O P T I O N S
• Press the “0” key, and the screen will now read:
V E R I F Y A F T E R C O P Y Y E S / N O
• Press the “START/YES” key to enable, or the “STOP/NO” key to
disable the Verify After option. If you press the “START/YES” key the
screen will read:
V E R I F Y A F T E R C O P Y I S O N
• You will then be returned to the main operating screen.
S E L E C T C O P Y O R C O M P A R E