Owner manual

CD-3706/P Operator’s Guide
Document Revision: 030501.1
CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 29
Comparing From A Hard Disk Image
For quality control purposes, the CD-3000 is equipped with powerful
verification capabilities. Copied discs can also be compared against hard
disk images. This feature ensures copying integrity.
Note: Due to the nature of the various compact disc formats, only
CD-ROM Mode 1, CD-ROM Mode 2, CD-ROM XA Mode 2
Form 1, and most CD formats can be compared.
Multiple Images Disabled
To compare copied discs to a hard disk image that was previously created
with the Multiple Images feature “disabled” (i.e. from a single hard disk
image), the steps are as follows:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Load the copied discs to be compared into the input bin.
• Press the “COMPARE” key on the keypad. The screen will now read:
C O M P A R E A G A I N S T H D ?
• Press the “START/YES” key. The screen will now read:
E N T E R Q U A N T I T Y :
Progress will be displayed on the screen during the operation:
C O M P A R I N G . . .
G O O D : 0 B A D : 0 O F : 0
Upon successful completion, the compared disc(s) will be ejected.
The screen will now read:
C O M P A R E O K , P R E S S S T A R T
• Press the “START/YES” key, and you will be returned to the main
operating screen: