User guide

How to Configure the Cougar 6600 Client
Configure the Cougar 6600 client feature to enable remote users.
• Connect the Cougar 6600 to your network using the RJ-45
connector.
• Turn on the Cougar 6600
• Wait for the Cougar 6600 Standalone Series to boot up, you will
see:
• Press the “7” key, you will see:
• Press the “START/YES” key, you will see:
• You must leave “MF” at the front of the name. You should name
it “MF106” for example.
Page 2