EC LX1 Quick Connect Guide 3702 Series www.mfdigital.
22 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 Connection Using a cross-over cable and ethernet ports from each machine, connect the LX1 to the MFDigital unit with the cross-over cable.
33 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 Operation 1. 2.
44 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer In "localhost" click "send FTP image" The FTPTREE dialog box will pop up.
55 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 Here you enter the IP address, username and password of the LX1 unit Enter the IP address of the LX1. The default IP address set by Pioneer is 192.168.0.
66 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 Enter the User Name for the LX1.
77 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 Enter the Password for the LX1.
88 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 **Note, the Pioneer factory settings can change, refer to the PRV-LX1 manual for IP Address, Username and Password configurations Click "Browse Site" and the LX1 directory will appear Page 8
99 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 Click "imagefiles" on the PRV-LX1 directory to retrive DVD image Once the DVD image is selected/highlighted click "OK" Page 9
1010 LX1EC Quick Guide Scribe QuickConnect Installation Guide with Prism PLUS Printer Document Document Revision: Revision: 2004/12/07 2005/2/3 The FTPTREE dialog box will automatically close and the LCD simulation display will show "receiving image XXX MBs" on the "localhost" tab of the MF Digital software This indicates the DVD image selected is now being transfered to the MF Digital unit.