Scribe EC 3000 Series Install Guide Document Revision: 6/1 Making the USB to RS232 connection to ScribeEC 3000 SA Series. fig.
Aligning the Drive Bay 1. 3704EC & 3706EC ONLY – SKIP IF SETTING UP 3702EC AS DRIVE BAY IS PRE-ALIGNED AT FACTORY Please follow the instructions below to align the drive bay on the Scribe EC Standalone. • From the main operating screen depicted below: • Press the “4” key. You will then be prompted to “Start Loader Test Mode?”. Press the “Start/Yes” key to enter “Loader Test Mode” • The following screen will appear. Place a CD in the 1st input area.
Aligning the Printer 1. Selecting the Printer To select the appropriate printer, do the following: At the “Select Copy or Compare, press the “2” key From the Options Screen, press the “5” to select the printer Choose the printer you installed. The system will reboot. 2. Aligning the Printer • After reboot, the main operating screen displays below: • Press the “4” key.