Instruction manual

128
PARAMETERS
6)Response time
[Formula for data sending time]
Communication specification
In addition to the bits in the above table, 1 bit is required for the start bit.
Minimum total number of bits ....... 9 bits
Maximum total number of bits...... 12 bits
1
x
Number of data
characters
(Refer to page 126)
x
Communication
specification
(Total number of bits)
(See below)
=
Data
sending
time (s)Communication speed (bps)
Name Number of Bits
Stop bit length
1 bit
2 bits
Data length
7 bits
8 bits
Parity
check
Yes 1 b i t
No 0 bit
(set value 10ms)
(set value 10ms)
Inverter
Computer
Inverter data processing time = waiting time + data check time
(12ms)
10ms or
more required
10ms or
more required
STX
ACK ENQ
Inverter data processing time = waiting time + data check time
(12ms)
10ms or
more required
Data sending time
Computer
Inverter
Inverter
Computer
ENQ
Data sending time
Data sending time
Data sending time
Computer
Inverter
(refer to the following formula)
(refer to the following formula)
(refer to the following formula)
(refer to the following formula)
M4500E.book 128 ページ ２００５年２月２２日 火曜日 午後５時７分