Instruction manual

157
4
PARAMETERS
Pr. 903 "frequency setting voltage gain"
(Pr. 902, Pr. 904 and Pr. 905 can also be adjusted similarly.)
<Adjustment procedure>
When using an external frequency setting signal to set the frequency.
(1) Power-on (monitoring mode)
(2) Choose the PU operation mode.
1) Using the key, make sure that the PU operation mode has been selected.
PU
MODE SET REV
STOP
RESET
FWD
MON
Hz
MODE
PU
MODE SET REV
STOP
RESET
FWD
Confirm that the PU operation mode
( ) has been chosen.
In the JOG operation mode ( )
or external operation mode ( ),
press the / key to display .
If cannot be displayed by pressing
the / key in the external operation mode
( ) (if Pr. 79 "operation mode
selection"
≠
"0"), refer to 2) and set "1" (PU
operation mode) in Pr. 79 "operation mode
selection".

Monitoring mode
MODE

Frequency setting
mode
Hz
PU
Hz
PU
MON

Parameter setting
mode
PU EXT

Help mode
PU
Operation mode
(PU operation mode)
MODE MODE
MODE MODE
M4500E.book 157 ページ ２００５年２月２２日 火曜日 午後５時７分