Instruction manual

6
OUTLINE
1.3.2 Removal and reinstallation of the front cover
Removal
The front cover is fixed with hooks in positions A, B and C.
Push A and B in the directions of arrows at the same time and remove the cover
using C as supporting points.
Reinstallation
When reinstalling the front cover after wiring, fix the hooks securely.
With the front cover removed, do not switch power on.
Note:1. Make sure that the front cover has been reinstalled securely.
2. The same serial number is printed on the capacity plate of the front cover
and the rating plate of the inverter. Before reinstalling the front cover, check
the serial numbers to ensure that the cover removed is reinstalled to the
inverter from where it was removed.
2) 3)
C
A B
C
1)
M4500E.book 6 ページ ２００５年２月２２日 火曜日 午後５時７分