Instruction manual

49
3
OPERATION/CONTROL
3.2 About the Operation Panel
With the optional operation panel (FR-PA02-02), you can run the inverter, set the
frequency, monitor the operation command display, set parameters, and display an
error.
3.2.1 Names and functions of the operation panel (FR-PA02-02)
 Key indication
 Unit indications, operating status indications
Key Description
key
Used to give a start rotation command.
key
You can select the operation mode or setting mode.
key
You can determine the frequency and parameter setting.
key
• Used to increase or decrease the running frequency
consecutively. Hold down this key to change the frequency.
• Press this key in the setting mode to change the parameter
setting consecutively.
key
Used to give a forward rotation command.
key
Used to give a reverse rotation command.
key
• Used to stop operation.
• Used to reset the inverter when its output is stopped by the
activated protective function.
Indication Description
Hz
Lit to indicate frequency.
(Flickers or lit when Pr.52 "operation panel/PU main display data selection"
= "100". Refer to page 92.)
A Lit to indicate the current.
RUN
Lit while the inverter is operating. Lit to indicate forward rotation, and flickers
to indicate reverse rotation.
MON Lit in the monitor display mode.
PU Lit in the PU operation mode.
EXT Lit in the external operation mode.
Hz
A
PU
RUN
MON
EXT
Display
LED 4 digits
Mode key
MODE SET REV
STOP
RESET
FWD
Setting key
STOP
RESE T
RUN
Hz
A
PU
RUN
MON
EXT
STOP/RESET keyRUN key
Cover opened
Unit indication
Operation status
indication
Reverse key
STOP/RESET key UP/DOWN keyForward key
RUN
MODE
SET
/
FWD
REV
STOP
RESET
M4500E.book 49 ページ ２００５年２月２２日 火曜日 午後５時７分