Instruction manual

50
OPERATION/CONTROL
3.2.2 Monitor display is changed by pressing the [MODE] key
(Note)The frequency setting mode is displayed only in the PU operation mode.
3.2.3 Monitoring
• Operation command indications given while a monitor display is being provided EXT
is lit to indicate external operation.
PU is lit to indicate PU operation.
Both EXT and PU are lit to indicate combined operation.
• The monitor display can also be changed during operation.
Note:1. Hold down the key marked *1 for more than 1.5 s to change the current
monitor to the power-on monitor.
2. Hold down the key marked *2 for more than 1.5 s to display the last four
errors including the most recent one.
3. In the external operation mode, it shifts to the parameter setting mode.
MODE

Monitoring mode
MODE

Frequency setting
mode (Note)
Hz
PU
MODE SET REV
STOP
RESET
FWD
MODE SET REV
STOP
RESET
FWD
Hz
PU
MON

Parameter setting
mode
PUEXT
MODE SET REV
STOP
RESET
FWD

Help mode
PU
MODE SET R EV
STOP
RESET
FWD

Operation mode
PU
MODE SET REV
STOP
RESET
FWD
MODE
MODE
MODE MODE

Frequency monitor

Alarm monitor
Alarm absent
SET
SET
*2
To 3.2.4 Frequency setting mode (Note3)
SET
MODE
*1
SET
Hz
MON
EXT
PU
MODE SET REV
STOP
RESET
FWD
Alarm present
SET

Voltage monitor
*1
SET
PU
MON
EXT

Current monitor
*1
SET
PU
MON
EXT
A
SET
SET
SET
M4500E.book 50 ページ ２００５年２月２２日 火曜日 午後５時７分