Instruction manual

55
3
OPERATION/CONTROL
(3) Parameter clear
Initializes the parameter values to the factory settings. The calibration values are
not initialized.
(Parameter values are not cleared by setting "1" in Pr. 77 "parameter write disable selection")
Note: The Pr. 75, Pr. 180 to Pr. 183, Pr. 190 to Pr. 192, and Pr.901 to Pr. 905 values are
not initialized.
(4) All clear
Initializes the parameter values and calibration values to the factory settings.
Note: The Pr. 75 value is not initialized.
Cancel
SET
SET
Flicker
SET
Cancel
SET
SET
Flicker
SET
M4500E.book 55 ページ ２００５年２月２２日 火曜日 午後５時７分