Instruction manual
Table Of Contents
- SAFETY INSTRUCTIONS
- CONTENTS
- CHAPTER 1 OUTLINE
- CHAPTER 2 INSTALLATION AND WIRING
- CHAPTER 3 OPERATION/CONTROL
- CHAPTER 4 PARAMETERS
- CHAPTER 5 PROTECTIVE FUNCTIONS
- 5.1 Errors (Alarms)
- 5.2 Troubleshooting
- 5.2.1 Motor remains stopped.
- 5.2.2 Motor rotates in opposite direction.
- 5.2.3 Speed greatly differs from the setting.
- 5.2.4 Acceleration/deceleration is not smooth.
- 5.2.5 Motor current is large.
- 5.2.6 Speed does not increase.
- 5.2.7 Speed varies during operation.
- 5.2.8 Operation mode is not changed properly.
- 5.2.9 Operation panel (FR-DU04) display is not provided.
- 5.2.10 POWER lamp is not lit.
- 5.2.11Parameter write cannot be performed
- 5.3 Precautions for Maintenance and Inspection
- CHAPTER 6 SPECIFICATIONS
- CHAPTER 7 OPTIONS
- APPENDICES
- REVISIONS
1.3 Structure
OUTLINE
3
1.3 Structure
1.3.1 Appearance and structure
(1) Front view (2) Without front cover
Brake resistor *
(Fitted to the back)
POWER lamp
ALARM lamp
Operation panel (FR-DU04)
Accessory cover
Wiring port cover for option
Front cover
Rating plate
Capacity plate
Wiring cover
PU connector
(Provided with modular jack type relay connector)
(For use with RS-485 cable for communication)
Modular jack type relay connector compartment
Inboard option mounting position
Main circuit terminal block
Control circuit terminal block
*005 and smaller inverters are equipped with an inboard brake resistor.