Instruction manual
Table Of Contents
- SAFETY INSTRUCTIONS
- CONTENTS
- CHAPTER 1 OUTLINE
- CHAPTER 2 INSTALLATION AND WIRING
- CHAPTER 3 OPERATION/CONTROL
- CHAPTER 4 PARAMETERS
- CHAPTER 5 PROTECTIVE FUNCTIONS
- 5.1 Errors (Alarms)
- 5.2 Troubleshooting
- 5.2.1 Motor remains stopped.
- 5.2.2 Motor rotates in opposite direction.
- 5.2.3 Speed greatly differs from the setting.
- 5.2.4 Acceleration/deceleration is not smooth.
- 5.2.5 Motor current is large.
- 5.2.6 Speed does not increase.
- 5.2.7 Speed varies during operation.
- 5.2.8 Operation mode is not changed properly.
- 5.2.9 Operation panel (FR-DU04) display is not provided.
- 5.2.10 POWER lamp is not lit.
- 5.2.11Parameter write cannot be performed
- 5.3 Precautions for Maintenance and Inspection
- CHAPTER 6 SPECIFICATIONS
- CHAPTER 7 OPTIONS
- APPENDICES
- REVISIONS
7.1 Option List
OPTIONS
200
7 OPTIONS
7.1 Option List
7.1.1 Stand-alone options
Name Type Applicable Models Description
Parameter unit
(8 languages)
FR-PU04-MGI M4500-001 to 100
Parameter Unit, 24-key, Multi-language,
Back-lit LCD display
Parameter unit connection
cable
FR-CB20 M4500-001 to 100
Control Panel / Parameter Unit extension
cable
=1,3, or 5 for length in meters
FR-A5CN02 M4500-001 to 010
FR-A5CN04 M4500-025/040
Cooling fin protrusion
attachment
FR-A5CN06 M4500-060/100
Adapter for through enclosure mounting of
heat sink and cooling fan
FR-A5CV01 M4500-001 to 010
Totally enclosed structure
specification attachment
FR-A5CV02 M4500-025/040
Enclosure upgrade to IP40.
Note: Use of this accessory reduces the
VFD ambient temperature rating to 30 deg.
C (86 deg. F)
FR-BSF01 M4500-001 to 005
For line noise reduction ( applies for small
size of 3.7K or less )
Line noise filter
FR-BLF M4500-001 to 100 For line noise reduction