Micronix PC/104 Power Supply User Manual & Installation Guide

Users Manual & Installation Guide
PV- 1075: N I MH BATTERY PACK WITH CHARGER
Page 8 of 9
Technical data
Mains input:
PV-1075 18 – 36Vdc Input voltage:
PV-1075-CAR
10.8 – 13.2Vdc
PV-1075
Standard charge: 69mA @ Vin=24Vdc
Trickle charge: 43mA @ Vin=24Vdc
Input current:
PV-1075-CAR
Standard charge: 115mA @ Vin=12Vdc
Trickle charge: 64mA @ Vin=12Vdc
Battery charger:
Charging modes: Standard charge: 50mA
Trickle charge: 25mA
Charging time: Standard charge: 12hrs
Trickle charge: continuous
Charge counter: Counting 0 -> Max.: approx.12hrs.
Counting Max. -> 0: approx. 23min.
Battery:
Battery voltage: 12V typical
Battery type: NiMH
Number of cells: 10pcs.
Battery capacity: 500mAH
Recommended discharge current(max): 750mA
Battery protection: polymer fuse
Environmental:
Temperature range by Standard charge: 0 to 70°C
Temperature range by discharge: -10 to 70°C
Storage temperature: -20 to 30°C
Humidity: 20 to 90% non-condensing
Cyclic humidity: ETS 300 019-2-5 or equal
Vibration: 10-1000 Hz sinus and random @ 1-1.5G RMS
Sustained vibration: EN 60068-2-34 & 60068-2-36
Shock: IEC 60068-2-27 & 60068-2-29
Weight: 185g
Size (WxLxH) 90 x 96 x 15