Network Router User Manual

3. Connect the A/C power adapter to the wall socket, and then connect it to the

‘Power’ socket of the router.

4. The ADSL LED will be ON if the router is connected to the ADSL cable and

receives the ADSL signals successfully. If the LED is blinking, please contact with

your ISP (Internet Service Provider) to check the problem.

3.2 Connecting to Web-Based Management

After the network connection is established, the next step is to setup the router with

proper network parameters for the user’s network environment.

Before connecting to the router and start configuration procedures, user’s computer

must be able to get an IP address automatically (use dynamic IP address). If the PC is

set to ‘static IP address’, then follow instructions below to reconfigure it to ‘dynamic IP

address’.

3.2.1 IP Address Configuration

a) Windows 95/98/Me

1. Click the Start button and select <Settings>, then click <Control Panel>. The

Control Panel window will appear.

2. Double-click on <Network> icon. The Network window will appear.