Network Router User Manual

3. Check the list of Network Components. If TCP/IP is not installed, click the

<Add> button to install it. If TCP/IP is installed, go to step 6.

4. In the Network Component Type dialog box, select <Protocol> and click <Add>

button.

5. In the Select Network Protocol dialog box, select <Microsoft> and <TCP/IP>

then click the <OK> button to start installing the TCP/IP protocol. Windows CD

may be needed to complete the installation.

6. After installing TCP/IP, go back to the Network dialog box. Select <TCP/IP>

from the list of Network Components and then click the <Properties> button.

7. Check each of the tabs and verify the following settings:

y Bindings: Check Client for Microsoft Networks and File and printer sharing

for Microsoft Networks.

y Gateway: All fields are blank.

y DNS Configuration: Select Disable DNS.

y WINS Configuration: Select Disable WINS Resolution.

y IP Address: Select Obtain IP address automatically.

8. Reboot the PC. PC will now obtain an IP address automatically from the

Broadband Router’s DHCP server.

9. Please make sure that the Broadband router’s DHCP server is the only DHCP

server available on the LAN network.

10. Proceed to Web-based User Interface once IP address is correctly configured.