Network Router User Manual

Dynamic Route
Dynamic routing allows routing tables in routers to change as
the possible routes change. This router supports RIP1, RIP2-
B and RIP2-M protocols for dynamic routing. After the RIP
protocol is selected, please choose the RIP direction from
“None”, “Both”, “IN Only” or “OUT Only”.
Multicast
Specify the method of transmitting data simultaneously to
many receivers. Please select “IGMP v1” or “IGMP v2” as the
multicast protocol or select “Disabled” to disable the function.
MAC Spoofing
Once your ISP service requires identifying the MAC address
of the devices. You can enable MAC Spoofing function and
enter the valid MAC address, it allows you to change the MAC
address of the router in order to access to the Internet
service.
4.2.2 LAN
Router Local IP
Parameter Description
IP Address
Enter the IP Address of the ADSL router for the local user to
access the router’s web page. By default, the IP Address is
192.168.2.1.
IP Subnet Mask
Enter the Subnet Mask of the ADSL router. By default, the
Subnet Mask is 255.255.255.0.
24