Network Router User Manual

Broadcast SSID

Select “Yes” to make the SSID to be visible so wireless clients

can scan the router within the network. Select “No” if you want

to hide the SSID of the router. Wireless clients have to set the

same SSID of the router in order to access the network.

WMM

The short of Wi-Fi Multi Media, it will enhance the data

transfer performance of multimedia contents when they’re

being transferred over wireless network.

Use WPS

Select “Yes” to enable WPS function, Select “No” to disable

WPS.

WPS Settings

Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless

network clients and this router. Users do not have to select encryption mode and input

a long encryption passphrase every time, they only have to press a button on wireless

client and this wireless router to allow WPS complete the setup.

This router supports two types of WPS: Push-Button Configuration (PBC), and PIN

code. If users want to use PBC, they have to switch this wireless router to WPS mode

and push a specific button on the wireless client to start WPS mode. Users can push

Reset/WPS button of this router, or select “PBC” and click “Start WPS” button in the

WPS setup page. If users want to use PIN code, they have to know the PIN code of

wireless client and switch it to WPS mode, then set the PIN code of the wireless client

to this router in the WPS setup page and click “Start WPS” button.

Parameter Description

Enrollee PIN Code

Enter the PIN code of the wireless client here. If you have

entered the PIN code of the wireless client and switch to the

WPS mode, the security settings of the wireless client will be

set to the same as the router.

WPS progress Display the progress during WPS communication.

Reset to OOB

Click this button and all the wireless settings of the router will

be reset to factory defaults.

SSID

The SSID (up to 32 printable ASCII characters) is the unique

name identified in a WLAN. The ID prevents the unintentional

merging of two co-located WLANs. The default SSID of the

router is “default”.