Network Router User Manual

Routing Table List
Users can see the current routing table of the router here. If they want to add another
routing rule, please click “ADD ROUTE”.
Parameter Description
Dest IP Show the IP Address of the destination LAN.
Mask
Show the Subnet Mask of the destination LAN. If it shows “8”
that means the Subnet Mask is “255.0.0.0”; “16” means the
Subnet Mask is “255.255.0.0”; “24” means the Subnet Mask is
“255.255.255.0”.
Gateway IP
The next stop gateway of the path toward the destination
LAN. This is the IP of the neighbor router that this router
should communicate with on the path to the destination LAN.
Metric
The number of hops (routers) to pass through to reach the
destination LAN. It must be between 1 and 15.
Device
Show the interface that go to the next hop (router), such as
LAN port.
Use The counter for access time.
Edit Edit the route, this icon is not shown for system default route.
Drop Drop the route, this icon is not shown for system default route.
Add Route
If users have another router with a LAN-to-LAN connection, they may need to create a
static routing on the router that is the gateway to Internet.
Parameter Description
Destination IP
Address
Enter the IP Address of the destination LAN.
32