Network Router User Manual

Parameter Description

Virtual Server for

Show the Virtual Server setting is for single or multiple IP

Addresses.

Rule Index Choose the rule number.

Application

Select the application of the virtual server, for example: FTP

or HTTP Server. When the application is selected, the port

number for the application will be assigned automatically.

Start Port Number Enter the start port number.

End Port Number Enter the end port number.

Local IP Address

It is recommended to enter a static IP Address for the server

here. If the server’s IP Address is obtained from DHCP

Server, the IP Address may be changed dynamically and will

cause problem in the feature. Please assign a static IP

Address to the server and make sure that the IP Address is

not in the range of IP Addresses that the DHCP Server will

assign.