Operation Manual
8 DL150 Series Fixed-Format I/O Unit
2. Getting Started
This section shows you how to unpack, install, connect up, switch on and congure the DL150 Series I/O unit.
This equipment is supplied by a mains voltage that can cause electric shock injury.
Before installing, setting up or operating this equipment, make sure that you have read and fully understand all of this
section and the “Important safety instructions” at the front of this manual. Refer to additional safety information on the
top cover of the unit.
Unpacking
Carefully unpack your DL150 Series I/O unit. Then, inspect the DL150 Series I/O unit carefully for any signs of damage that may
have occurred during transit and notify the courier immediately if you discover any.
Check the contents of your DL150 Series I/O unit equipment package. If there are any parts missing, incorrect or faulty, please
contact your local distributor or MIDAS at the address at the front of this manual.
The DL150 Series - rear panels. Showing from top to bottom, DL151, DL152, DL153, DL154, DL155