Use and Care Guide

Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
INSTALL WATER FILTER
4. Remove the water filter from its packaging, and then remove the clear,
plastic cap from the filter head.
5. Align the tabs on the filter head with the notches in the opening, and
then insert the water filter into the opening. Press inward, while turning
the filter clockwise to install.
NOTE: The housing allows the filter to move slightly upward and
downward.
Water filter
7. Close the filter cover.
6. Turn on the water supply to refrigerator.
REPLACE WATER FILTER
The Water Filter icon on the control panel will illuminate after 150+ days to
indicate that it is time to order a replacement water filter. After 180+ days
the icon will illuminate and flash to indicate it is time to replace the water
filter.
1. Turn o the water supply to refrigerator.
2. Turn the water filter counterclockwise, and then pull out to remove.
3. Install a new water filter following steps 4 to 7 in the previous section.
4. Press and hold the Water Filter control for 3 seconds to clear and reset
the filter status clock.
NOTE: T