Troubleshooting guide

ENGLISH

To select the repeater shift you can use the fast menu: press

the

key and then and follow the procedure above

described starting from point 3.

Repeater shift adjustment

(for communications through repeaters)

1. press the button;

2. turn the Encoder knob until ‘DIFFR’ (menu 15) is

displayed

3. push

;

4. turn the Encoder knob and select the repeater shift. You

can also enable it by digiting the frequency directly on the

keypad.

5. press

;

Select the frequency step

1. press the button;

2. turn the Encoder knob until ‘STEP’ (menu 20) is displayed

3. push

;

4. turn the Encoder knob and select the desired frequency

step. You can choose amongst: 5 KHz, 10 KHz, 6.25 KHz,

12.5 KHz and 25 KHz;

5. press twice the

knob to exit

Select the CTCSS and DCS tones

To select a CTCSS tone

1. press the

button;

2. turn the Encoder knob until ‘C-CDC’ (menu 16) is

displayed

3. push

;

4. turn the Encoder knob and select the desired subaudio

tone;

5. press

to conﬁrm.

To select a DCS tone:

1. select ‘C-CDC’ (menu 16) either with the Encoder knob or

with the fast access;

2. Press

3. Press the button;

4. turn the Encoder knob and select the desired DCS level;

5. press

again for conﬁrmation.