Troubleshooting guide

ENGLISH

While selecting the DCS codes, if you press

, you will

select the normal (N) or inverted (I) DCS codes.

Voice function (only in English)

With this function, you activate a voice that informs about any

operation/selection you are doing. To activate it, follow these

steps:

1. press the

button;

2. turn the Encoder knob until ‘VOICE’ (menu 14) is

displayed;

3. push

;

4. turn the Encoder knob and activate/deactivate the function.

(ON = enabled; OFF = disabled);

5. Push again;

6. press twice the

knob to exit.