Troubleshooting guide

ENGLISH

DTMF Code

In Channel/Frequency mode, press PTT and digit a number on the keypad.

Flank keys

PTT: push to transmit and release

it to receive

MONI: push it to monitor the

frequency in use

Select Mode

Hold down and turn on the power: the radio can switch between the Channel

and Frequency mode. Repeat the procedure to pass to the other mode.

In Frequency mode, press to switch between the Frequency mode and

Channel+Frequency mode.

To store a frequency

To store a frequency and its settings (CTCSS,DCS, SHIFT REPEATERS etc)

follow the procedure below:

1. at ﬁrst, choose all the settings to store,

2. press the

button,

3. then, push

4. rotate the Encoder knob and select the memory number where you want to

store the frequency and its settings.

5. conﬁrm your selection by pressing

(note: a triangle displayed underneath the channel number indicates that it has

already been stored).

PTT + CALL: push to enable a

1750Hz tone