Owner's manual

120-6B User’s Installation Guide

Packaging and Enclosed Parts

The following diagram shows the only included part required for installation. Please inspect your pack for damaged or missing parts.

Female

IEC

Receiving

Plug

Electronics

Housing

Do Not

open. No

usable or

reparable

parts inside

36” Cord each end

Male

U-Ground

Plug

No tools are required for installation

Installation

Make certain that the device you want to protect accommodates

the universal IEC female plug. This is the same kind of plug that

you are used to seeing on the back of your desktop computer. It

is also used on a TV, Projector, Stereo, Preamp Processor,

Subwoofer and many other valuable electronic appliances.

Female IEC Plug

Meets all UL and Electrical code

requirements. A licensed

electrician is NOT required for

installation.

Insure that power to your device that you want to protect is de-

energized. Unplug the power cord from the wall socket and

remove the IEC plug from your device.

NOTE: This should be operated from a branch circuit with a

minimum of a 15 Amp circuit breaker ran with 14-12 gauge wire.

Connect the 120-6B IEC female connector to the equipment

you want to protect. Now plug the U-Ground plug on the 120-6B

to the desired 110VAC wall socket. You are now Protected.

Specifications and Ratings are subject to change pending final approval from UL

www.MIDLITE.com

Corporation

866 Warren Street, Fall River, MA 02721 Sales 800-606-5169