Operating instructions

Showroom programme
This programme is for demonstration
use only.
–
Demo with sound:
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
–
Demo AutoOpen::
The door will open automatically.
To switch Demo mode on
^
Select the option you want.
^ Select
On and confirm with the
middle of the three buttons beside
the display.
^ Close the door.
Demo mode will begin.
To switch Demo mode off
Demo mode will switch off automatically
when it reaches the end of the cycle.
Factory default
If you have altered any settings from
the factory default, you can reset them
back to the factory default settings.
^
Select
Reset to default and confirm
your selection with the middle of the
three buttons beside the display.
To close the Settings menu
Use Close to come out of the Settings
menu.
^
Select
Close and confirm your
selection with the middle of the three
buttons beside the display.
The display will then show the last
programme selected and the indicator
light for the programme selected will
come on.
Settings menu
74