User manual

17
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following suction power se-
lectors.
– Rotary selector
– Radio-control handle
Rotary selector
 Turn the rotary selector to the suction
power setting you require.
Radio-control handle
When the vacuum cleaner is switched
on with the On/Off foot control , the
suction power setting  will flash in
the vacuum cleaner display.
 Press the Standby button  on the
handle.
The suction power setting  will light
up in the vacuum cleaner display.
The first time the vacuum cleaner is
switched on, the highest setting will be
selected automatically.
After that, the vacuum cleaner will
switch on at the setting which was used
previously. This will flash.
 Press the + button on the handle to
select a higher suction power setting.
 Press the - button on the handle to
select a lower suction power setting.
To open the air inlet valve
(not on models with radio-controls on
the handle or on Eco Comfort handles)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.