Operating Instructions Dishwasher To prevent accidents and machine damage, read these instructions be‐ fore installation or use. en-US HG05 M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS................................................................. 5 Guide to the dishwasher ..................................................................................... 14 Appliance overview................................................................................................ 14 Control panel.......................................................................................................... 15 Caring for the environment .........................
Contents At the end of the program...................................................................................... 42 Turning off .............................................................................................................. 43 Unloading the dishwasher ..................................................................................... 43 Interrupting a program ........................................................................................... 44 Changing a program ...........
Contents Sound emission testing .......................................................................................
IMPORTANT SAFETY INSTRUCTIONS This dishwasher complies with current safety requirements. Inap‐ propriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the dishwasher, please read the installation plan and the operating instructions carefully before it is installed and used for the first time. They con‐ tain important information on its installation, safety, use and main‐ tenance.
IMPORTANT SAFETY INSTRUCTIONS Correct use This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. It must only be used as specified in these operating instructions for cleaning domestic dishware and cutlery. Any other usage is not supported by the manufacturer and could be dangerous.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the appliance unless they are constantly supervised. Children should be supervised to ensure that they do not play with the appliance. Keep small children away from the appliance at all times to avoid the risk of injury. There is the risk that children may lock themselves in the dishwasher.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair, and maintenance work should only be per‐ formed by a Miele-authorized service technician. Work by unquali‐ fied persons could be dangerous and may void the warranty. Before installation, check the dishwasher for visible signs of dam‐ age. Under no circumstances should you use a damaged dishwash‐ er. A damaged dishwasher could be dangerous.
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage, and frequen‐ cy) matches the electrical supply before connecting the dishwasher to the mains. Consult a qualified electrician if in any doubt. Do not connect the dishwasher to the electrical supply until it has been fully installed and any adjustment has been made to the door springs.
IMPORTANT SAFETY INSTRUCTIONS The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele-authorized service technician. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safe‐ ty of the appliance. During installation, maintenance and repair work, the appliance must be disconnected from the electrical supply (turn it off and with‐ draw the plug from the socket).
IMPORTANT SAFETY INSTRUCTIONS Proper installation The dishwasher must be installed and connected in compliance with the installation plan. Be careful when installing the dishwasher. Wear protective gloves to avoid injury on any sharp metal components. The dishwasher must be correctly aligned horizontally to ensure problem-free operation.
IMPORTANT SAFETY INSTRUCTIONS Proper use Do not use solvents in the dishwasher. Danger of explosion! Do not inhale or ingest powder detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or in‐ haled. Avoid leaving the door open unnecessarily as someone could trip over it and be injured by it.
IMPORTANT SAFETY INSTRUCTIONS In an appliance with a cutlery basket (depending on model), cut‐ lery is cleaned and dried more efficiently if placed in the basket with the handles downwards. However, to avoid the risk of injury, place knives and forks with the handles upwards. Plastic items which cannot withstand being washed in hot water, such as disposable plastic containers or plastic cutlery should not be cleaned in the dishwasher.
Guide to the dishwasher Appliance overview a Upper spray arm (not visible) g Filter system b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dis‐ penser e Air intake for drying (depending on model) f Lower spray arm 14 k Reservoir for dishwasher salt
Guide to the dishwasher Control panel a Program selection e Short button with indicator light b Time display f Delay Start button with indicator light c Check/Refill indicators d Start button with indicator light g Program selection button h (On/Off) Button These operating instructions apply to several different dishwasher models with different heights. The specific dishwasher models are referred to as follows: Standard = 31 11/16" (80.5 cm) high dishwashers (integrated) and 33 1/4" (84.
Caring for the environment Disposal of packaging material Energy-saving dishwashing The cardboard box and packaging pro‐ tect the appliance during shipping. These materials are biodegradable and recyclable. Please recycle. This dishwasher is economical in the use of water and electricity. For best re‐ sults follow these tips: Disposal of your old appliance Old appliances may contain materials that can be recycled.
Before using for the first time Opening the door Closing the door Push the baskets in. Then lift the door upwards and push until it clicks into position. Danger of crushing injuries! Do not put your hand inside the door as it is closing. Child safety lock Use the safety lock to prevent children from opening the dishwasher door. To open the door, reach under the door grip and pull. If the door is opened during operation, all functions are automatically interrupt‐ ed.
Before using for the first time Water softener Enter the water hardness below: In order to achieve good cleaning re‐ sults, the dishwasher needs to operate with soft water. Hard water results in a build-up of calcium deposits on dish‐ ware and in the dishwasher. Water supplies with a hardness level higher than 4 gr/gal (4 °d) needs to be softened. This takes place automatical‐ ly in the integrated water softener.
Before using for the first time Displaying and setting the water hardness level Turn the dishwasher off with the button, if it is turned on. Press the Start button and, simulta‐ neously, switch the dishwasher on using the button. Keep the Start button pressed for at least four seconds until the Start indi‐ cator light comes on. If this does not happen, start the proce‐ dure from the beginning again. Press the button twice. The indicator light will flash twice at short intervals.
Before using for the first time 20 °d gr/gal °f Time display °d gr/gal °f Time display 1 1 2 1 21 22 38 21 2 2 4 2 22 23 40 22 3 3 5 3 23 24 41 23 4 4 7 4 24 25 43 24 5 5 9 5 25 26 45 25 6 6 11 6 26 27 47 26 7 7 13 7 27 28 49 27 8 8 14 8 28 29 50 28 9 9 16 9 29 30 52 29 10 10 18 10 30 31 54 30 11 11 20 11 31 32 56 31 12 13 22 12 32 33 58 32 13 14 23 13 33 34 59 33 14 15 25 14 34 35 61 34
Before using for the first time Before using the appliance for the first time, you require: – Approx. 2 qt (2 l) of water – Approx. 2 kg (4 lbs) of dishwasher salt – Domestic dishwasher detergent – Rinse aid formulated for domestic dishwashers Every dishwasher is tested at the fac‐ tory. There will be residual water in the appliance from this test. It is not an in‐ dication that it has been used previ‐ ously.
Before using for the first time Filling the salt reservoir Important! Before filling the salt res‐ ervoir with dishwasher salt for the first time, you must fill it with approx. 2 qt (2 l) of water to enable the salt to dissolve. Once the dishwasher has been used for the first time, there is always suf‐ ficient water in the reservoir. Remove the lower basket and un‐ screw the salt reservoir cap. Water will run out of the reservoir when the cap is removed.
Before using for the first time Salt refill indicator Fill the salt reservoir with dishwasher salt when the Salt indicator light comes on (If it comes on during a program, wait until the end of the program). Risk of corrosion! Immediately after filling the salt res‐ ervoir, run the Express program with the Short program option selected and without any dishware in the dishwasher to remove any traces of salt from the cabinet.
Before using for the first time Rinse aid Rinse aid is needed to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the res‐ ervoir. When using "Tab" detergents rinse aid is not needed. Adding rinse aid Add rinse aid only until it is visible in the opening.
Before using for the first time Rinse aid indicator When the Rinse Aid indicator lights up, the rinse aid reservoir contains suffi‐ cient rinse aid for 2 - 3 programs only. Add rinse aid. If you only ever use combination prod‐ ucts in your dishwasher, you can switch both refill indicators for salt and rinse aid off if you wish (see "Op‐ tions - Refill indicators"). Setting the rinse aid dosage You can adjust the rinse aid dosage for best results. The rinse aid dosage is set in stages from 0 to 6.
Loading the dishwasher Tips Remove coarse food residues from the dishware. There is no need to rinse items under running water! Do not wash items soiled with ash, sand, wax, grease, or paint in the dishwasher. These will damage the dishwasher. Dishware can be loaded anywhere in the baskets, but the following notes should be observed: – Do not place dishes or cutlery inside other pieces. They will cover each other. – Load the dishware so that water can access all surfaces.
Loading the dishwasher Items not recommended for dish‐ washing – Wooden cutlery, cutting boards and dishware or items with wooden parts – Craft items, antiques, valuable vases, and decorative glassware – Plastic items which are not heat-re‐ sistant: the high temperatures in the dishwasher may cause them to melt or lose shape. – Copper, brass, tin and aluminum items may discolor or become matt. – Colors painted over a glaze may fade after a number of washes.
Loading the dishwasher Loading examples Loading for 10 standard place settings with cutlery tray Upper basket Cutlery tray (depending on model) 28 Lower basket
Loading the dishwasher Loading for 16 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray (depending on model) 29
Loading the dishwasher Loading for 10 standard place settings with cutlery basket Upper basket Cutlery basket 30 Lower basket
Loading the dishwasher Loading for 13 standard place settings with cutlery basket Upper basket Lower basket Cutlery basket 31
Loading the dishwasher Upper basket For safety reasons, do not oper‐ ate the dishwasher without the upper and lower baskets in place (except when running the Tall items program, if available). Adjustable cup rack (depending on model) Raise the rack to make room for tall items. Glasses can be arranged along the po‐ sitioning rail of the cup rack to give them some support during the pro‐ gram. Lower the cup rack and lean the glasses against it, or double stack smaller pieces.
Loading the dishwasher Adjusting the upper basket In order to gain more space for taller items the upper basket can be adjusted on three levels with 3/4" (2 cm) be‐ tween each level. The upper basket can also be set at an angle with one side high and the other side low. Make sure, however, that the basket can slide smoothly in and out of the cabinet. Pull the upper basket out.
Loading the dishwasher Lower basket Removable MultiComfort insert The rear section of the lower basket is used for washing cups, glasses, plates, pots and pans. You can remove the MultiComfort insert to make more room for larger items such as casserole dishes. Removing the insert Pull the yellow handle forwards and remove the insert. Refitting the insert For larger and heavier items such as plates, serving platters, saucepans, bowls, etc.
Loading the dishwasher Glass rack Hinged spikes (depending on model) The glass rack can be raised to make more room for tall items. The spikes at the front are used for washing plates, soup bowls, platters, dessert bowls, and saucers. Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it. The spikes can be lowered to make more room for large items, e.g. pots, pans and dishes. You can set the glass rack at two differ‐ ent heights.
Loading the dishwasher Cutlery 3D cutlery tray (depending on model) Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in con‐ tact with at least one of the serrated re‐ tainers on the base of the cutlery tray to ensure that water runs off them freely. The upper spray arm must not be blocked by items which are too big.
Loading the dishwasher Cutlery basket (depending on model) The cutlery basket can be placed any‐ where on the front rows of spikes in the lower basket. Fit it onto the cutlery basket if re‐ quired. To avoid the risk of injury, knives and forks should be placed with the han‐ dles upwards in the basket. However, cutlery placed handle down in the basket will come out cleaner and dri‐ er. Place small items of cutlery in the in‐ dividual slots on three sides of the cutlery basket.
Operation Detergent Only use detergents formulated for domestic dishwashers. Refer to the manufacturer's packaging as to whether Tab products are suitable for the water hardness level in your area. Please note that the cleaning and dry‐ ing results of Tab detergents can vary greatly. For optimum cleaning and drying re‐ sults, use Miele dishwasher detergent and add Miele salt and Miele rinse aid separately. See "Optional accesso‐ ries.
Operation Adding detergent Press the opening catch on the de‐ tergent dispenser. The flap will spring open. The flap is always open at the end of a program. Add the required amount of detergent and close the flap. Make sure that the detergent packag‐ ing is properly closed after use to avoid it getting damp and becoming lumpy. Dispensing aid Compartment I holds a maximum of 2 teaspoons (10 ml), Compartment II holds a maximum of 3.5 tablespoons (50 ml) of detergent.
Operation Turning on Selecting a program Make sure the spray arms are not ob‐ structed. Choose your program according to the type of load and the degree of soiling. Close the door. The different programs and their uses are described in the Program Over‐ view chapter. Turn on the water supply if it is turned off. Turn the dishwasher on with the button. The Start indicator light flashes and the indicator light comes on next to the program selected.
Operation Starting a program The dishwasher can be started only if the door is closed. Press the Start button. The program will begin. The Start indicator light will come on. A program should only be canceled in the first few minutes, if at all. Oth‐ erwise important program stages could be omitted. Time display The duration of the program selected appears in hours and minutes in the display before the program begins. Dur‐ ing the program, the time left until the end of the program is displayed.
Operation Energy management At the end of the program To save energy, the dishwasher will switch off automatically 10 minutes af‐ ter the last time a button has been pressed or 10 minutes after the end of the program (see "Options - Optimize Standby"). The program has finished when . appears in the display. Press the button to switch the dishwasher back on. The dishwasher can now be opened and unloaded (see "Unloading the dishwasher").
Operation Turning off Unloading the dishwasher At the end of a program: Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comforta‐ ble enough to handle before unloading them. The dishwasher can be switched off at any time using the button. Turning the dishwasher off during a pro‐ gram stops the program. Turning the dishwasher off during the run-up to a delay start time (FlexiTimer) will also stop the process.
Operation Interrupting a program A program will be interrupted as soon as the door is opened. Close the door and press the Start button. The program will continue from the point at which it was interrupted. Water in the dishwasher may be hot. Danger of scalding! Only open the door if absolutely nec‐ essary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the tem‐ perature in the wash cabinet to set‐ tle.
Options Short The Short option reduces the dura‐ tion of programs in which this option is available. In order to achieve optimum cleaning results, consumption rates are in‐ creased with this option. When used in combination with the Rapid program, the Short option re‐ sults in a wash program without drying or automatic opening of the door (if available). Turn the dishwasher on with the button. The Start indicator light flashes. Select a program. Press the button.
Options Turning off the refill indicators Press the button 9 times. If you consistently use a Tab detergent, you can deactivate the refill indicators if you wish. The indicator light will flash 9 times at short intervals. Turn the dishwasher off with the button, if it is turned on. Press the Start button and, simulta‐ neously, switch the dishwasher on using the button. Keep the Start button pressed for at least four seconds until the Start indi‐ cator light comes on.
Options Delay Start You can set the start time for a pro‐ gram. The start time can be delayed between 30 minutes and 24 hours. The delay period is shown in 30 mi‐ nutes increments for a delay period be‐ tween 30 minutes and 9 hours 30 mi‐ nutes. It is shown in hours for periods longer than this. When using the Delay Start function, make sure that the detergent com‐ partment is dry before adding deter‐ gent. Wipe dry with a cloth if neces‐ sary.
Options If Optimize Standby is switched on (see "Options - Optimize Standby"), the time display will go out after a few minutes, leaving just the Start indica‐ tor light flashing slowly. Press any button to switch the display back on again for a few minutes. The time up until the program starts will count down in the display in hours for durations above 10 hours, and in mi‐ nutes for durations below 10 hours. When the set time is reached, the pro‐ gram selected will start automatically.
Options Optimize Standby Press the button 8 times. "Optimize Standby" is activated by de‐ fault. The indicator light will flash 8 times at short intervals. To save energy, the dishwasher will switch off automatically a few minutes after the last time a button has been pressed or after the end of a program. The flashing sequence in the display shows whether or not Optimize Stand‐ by is activated.
Options Factory default settings Press the button 19 times. If you have altered any settings from the factory default, you can reset them back to the factory default settings as follows: The indicator light will flash once at a long interval and then 9 times at short intervals. Turn the dishwasher off with the button, if it is turned on. Press the Start button and, simulta‐ neously, switch the dishwasher on using the button.
Program overview Program When to use Program sequence Prewash Main wash Interim rinse Final rinse Drying Normal Program for regular use to completely wash a full load of normally soiled dish‐ ware with the ability to ad‐ just energy and water con‐ sumption based on the soil load of the dishware. If re‐ quired X If re‐ quired X X Pots & Pans For heavily soiled dishware and normally soiled pots, pans and utensils with dried on residue; use 20% more detergent than rec‐ ommended.
Cleaning and care Check and clean your dishwasher regularly. This will help avoid prob‐ lems and faults. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolor all surfa‐ ces. Cleaning the wash cabinet Generally, the wash cabinet is self cleaning if the correct amount of deter‐ gent is used. If, however, there are lime scale or grease deposits in the cabinet, these can be removed with a special dish‐ washer cleaner (see "Optional accesso‐ ries").
Cleaning and care Cleaning the door front If soiling remains longer, it may happen that the surfaces can be‐ come discolored or changed. Remove any soiling immediately. Clean the front with a solution of warm water and a little dishwashing liquid applied with a soft sponge. Wipe the surfaces dry using a soft cloth. Glass cleaners may be used to clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface. Remove the cleaner promptly.
Cleaning and care Filter system Filter system The filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects. Turn the dishwasher off. This dishwasher must not be used without all the filters in place! Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use.
Cleaning and care To clean the inside of the filter, the flap must be opened: Press catches together in the di‐ rection of the arrows as shown, and open the filter . Rinse all the filters under running wa‐ ter. Then close the flap so that the catch engages. Replace the filter system so that it lies flat in the base of the wash cabi‐ net. Then turn the handle clockwise until both arrows point towards each oth‐ er. This will lock the filter system in place.
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Turn the dishwasher off. Remove the spray arms as follows: Take out the cutlery tray (if your dish‐ washer is fitted with one). Push the top spray arm upwards to engage the inner ratchet. Then un‐ screw the spray arm. Pull the lower spray arm firmly up‐ wards to remove it.
Frequently Asked Questions With the help of the following guide, minor faults in the performance of the appli‐ ance, some of which may result from incorrect operation, can be put right without contacting Miele Service. This will save time and money. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the following: Unauthorized or incorrect repairs could cause personal injury or damage to the appliance.
Frequently Asked Questions Problem Possible cause and solution The Intake/Drain and Rinse Aid indicator lights are flashing at the same time. Fault number ap‐ pears in the display. There may be a technical fault. Turn the dishwasher off with the button. Turn the dishwasher back on after a few seconds. Select the desired program. Press the Start button. If the indicator lights flash again, there is a technical fault. Contact Miele Service.
Frequently Asked Questions Water intake fault Problem Possible cause and solution The Intake/Drain indica‐ The water supply is turned off. tor flashes on and off. Turn on the water supply all the way. The dishwasher stops during a program. The Intake/Drain indica‐ tor flashes. Fault code or ap‐ pears in the display. Before fixing the fault: Turn the dishwasher off with the button. There is a problem with the water intake. Turn on the water supply fully and start the pro‐ gram again.
Frequently Asked Questions General problems Problem Possible cause and solution The indicator lights and The dishwasher has switched off automatically to time display are dark. save energy. Turn the dishwasher on again with the button. Detergent residue is left The dispenser was still damp when detergent was in the dispenser at the added. end of a program. Make sure the dispenser is dry before adding de‐ tergent. The dispenser cover cannot be closed. Detergent residue is blocking the latch.
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking noise in the wash cabi‐ net. A spray arm is hitting the dishware. Interrupt the program, and rearrange the items which are obstructing the spray arm. There is a rattling noise in the wash cabinet. Dishware is moving around in the wash cabinet. Interrupt the program and rearrange loose pieces. A foreign object (e.g., a cherry pit) has become lodged in the drain pump.
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishes are not clean. The dishes were not loaded correctly. See notes in "Loading the dishwasher". The program was not powerful enough. Select a more intensive program (see "Program overview"). Not enough detergent was dispensed. Use more detergent, or change your detergent. Items are blocking the path of the spray arms. Rearrange the items so that the spray arms can rotate freely.
Frequently Asked Questions Problem Possible cause and solution Dishware is not dry or cutlery and glasses are spotty. The rinse aid dosage is set too low or the rinse aid reservoir is empty. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see "Before using for the first time - Rinse aid"). Dishware was taken out of the cabinet too soon. Leave it in for longer (see "Operation"). Combination tabs have been used which have im‐ paired drying performance.
Frequently Asked Questions Problem Possible cause and solution White residue is visible The rinse aid dosage is too low. on dishware and cut‐ Increase the dosage (see "Before using for the first lery, clouding occurs on time - Rinse aid"). glassware; this film can The salt reservoir is empty. be wiped off. Fill the salt reservoir (see "Before using for the first time - Dishwasher salt"). The salt reservoir cap has not been screwed on cor‐ rectly.
Frequently asked questions Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a program, the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Turn off the dishwasher and pull the plug. Take the filter system out of the wash cabinet (see "Cleaning and care Cleaning the filters"). Scoop the water out of the cabinet using a suitable container or utensil. The drain pump is beneath the non-re‐ turn valve (see arrow).
Customer service Repairs Warranty For problems that you cannot resolve on your own, please contact: For more information, please refer to the included warranty. – your Miele dealer or MieleCare (USA only) – Miele Service The telephone number for Miele is listed at the back of these instruc‐ tions. In the event of a fault which you cannot correct yourself please contact the Miele Service Department at the phone number on the back of this booklet.
Optional accessories Dishwasher detergent and rinse aid, as well as cleaning and care products, are available as optional accessories. All the products are designed for use with Miele dishwashers. These and many other useful products can be ordered via the Miele website or from Miele (see end of this manual for contact details). Dishwasher detergent, rinse aid, and salt When you decided to buy a Miele dish‐ washer, you chose excellent quality and performance.
Optional accessories Dishwasher care products Accessories Miele cleaning and care products pro‐ vide optimum care for your dishwasher. Some accessories may be supplied as standard, depending on model. Dishwasher cleaner Cappuccinatore insert – Cleans the dishwasher effectively and thoroughly The Cappuccinatore insert can be used for cleaning the individual parts of the Miele Cappuccinatore in the dishwash‐ er.
Installation Instructions Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Electrical connection Installation, repairs and other work by unqualified persons could be dangerous. Check that the voltage, frequency and fuse rating shown on the data plate match the household mains supply. The power outlet must be accessible after installation. Do not use an ex‐ tension cord to connect the dish‐ washer to the mains. Danger of over‐ heating! See data plate on the right side of the door. A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician.
Electrical connection Hardwired electrical connection It is possible to hardwire this appliance to an existing power cable. CAUTION: Before servicing, discon‐ nect the power supply by either re‐ moving the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all ap‐ plicable codes and standards.
Water connection Water intake Water in the dishwasher must not be used as drinking water. – The dishwasher may be connected to a cold or hot water supply up to a maximum of 140°F/60°C. We would only recommend connec‐ tion to a hot water supply if it is eco‐ nomical, e.g. a solar-powered supply. When connected to a hot water sup‐ ply, all program stages which would otherwise be carried out with cold water will be carried out with hot wa‐ ter. – The intake hose is approx. 4' 11"/1.5 m long. A 1.
Water connection Drainage – The machine comes equipped with a built-in non-return valve on the dis‐ charge side to prevent waste water from flowing back into the dishwash‐ er. – Take the drain line of the dishwasher and attach the drain line as high as possible under the counter rim of the kitchen sink before connecting the end to the drain. The loop will serve to prevent a backed up drain or large volume of water in the sink from si‐ phoning back into the dishwasher.
Sound emission testing Prerequisites for sound emission tests Load the dishwasher with 16 standard place settings and use the Normal pro‐ gram. Setup for sound emission tests The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. Secure the front panel.
Sound emission testing Push the provided fleece strips (depending on model) under the toe-kick until it is flush with the appliance feet . Push the toe-kick into place in such a way that it is flush with the door front .
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Push the insulating strip into the front top edge of the toe-kick .
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
G 6100 / G 6105 en-US M.-Nr.
