Operating instructions Commercial dishwasher PG 8133 SCVi en - GB, IE To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. M.-Nr.
Contents Notes about these instructions............................................................................ 5 Guide to the machine ............................................................................................ Machine overview.................................................................................................... Control panel ........................................................................................................... Display..................................
Contents Energy management ............................................................................................. Programme end..................................................................................................... Switching off.......................................................................................................... Unloading the dishwasher..................................................................................... Interrupting a programme......................
Contents Technical data...................................................................................................... 77 Settings menu...................................................................................................... Open the Settings menu ....................................................................................... Language ........................................................................................................... Time of day..........................
Notes about these instructions Warnings Information which is important for safety is highlighted in a thick framed box with a warning symbol. This alerts you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe. Important Information of particular importance that must be observed is highlighted in a thick framed box.
Guide to the machine Machine overview a Upper spray arm (not visible) g Filter combination b Cutlery tray h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm e Air inlet for drying j Dual compartment detergent dispenser f Lower spray arm k In-operation indicator light l Salt reservoir 6
Guide to the machine Control panel a In-operation indicator light f OK button b Programme selection g Display c Option buttons with indicator lights h Programme selection button d Arrow buttons i (On/Off) button e button (FlexiTimer) with indicator light 7
Guide to the machine Display 'Settings' menu General information The display is used to select or set the following: – the programme – the FlexiTimer (Delay start) – the Settings menu The display can show the following: – the stage the programme is at – the estimated time left for the programme to run – any relevant fault messages and information To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time.
Correct use This dishwasher complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the dishwasher, please read these instructions carefully before using it for the first time. They contain important information on its safety, installation, use and maintenance. Keep these instructions in a safe place and pass them on to any future owner.
Correct use This dishwasher can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation. The dishwasher is equipped with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration).
Warning and Safety instructions Correct installation Do not install this dishwasher in an area where there is a risk of explosion or freezing conditions. Take care, both before and during installation of the dishwasher, not to cut yourself on the metal parts. Danger of injury. Wear protective gloves. To ensure stability a built-under dishwasher must only be installed beneath a continuous worktop that is bolted to the adjacent cabinetry.
Warning and Safety instructions In the event of a damaged or leaking dishwasher, switch off at the mains immediately and call Miele Professional Service or a suitably qualified service technician. Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can Miele guarantee the correct functioning and safety of the appliance. The electrical safety of this machine can only be guaranteed when correctly earthed.
Warning and Safety instructions The dishwasher must be disconnected from the mains electricity supply before any maintenance or repair work is carried out. The plastic housing of the water connection contains electrical components. It must not be dipped in water. There are electrical wires in the water inlet hose. Do not shorten the water inlet hose, even if it is too long.
Warning and Safety instructions Correct use This dishwasher is designed for operation with water and cleaning agents suitable for use in commercial dishwashers only. Organic solvents and flammable liquid agents must not be used in it. This could cause an explosion, damage rubber or plastic components in the dishwasher and cause liquids to leak out of it. Only use cleaning agents formulated for use in commercial dishwashers.
Warning and Safety instructions When using cleaning agents and specialised products, it is essential that the manufacturer's instructions are followed. Cleaning agents must only be used for the purpose they are designed for and in the situation specified, to avoid such dangers as serious chemical reactions and material damage (e.g. oxyhydrogen explosion). Do not inhale or ingest powder cleaning agent.
Warning and Safety instructions Safety with children Children should be supervised in the vicinity of the dishwasher. Never allow children to play with the machine. There is a danger that children might shut themselves in the dishwasher. Children under eight years of age must be kept away from the dishwasher unless they are constantly supervised. Children aged eight and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Caring for the environment Economical dishwashing This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your machine by following these tips: – For most economical dishwashing, make full use of the baskets without overloading the dishwasher. This results in the most economical dishwashing. – Choose the programme to suit the type of crockery being washed and the degree of soiling. – Select the ECO programme for energy-saving dishwashing.
Before using for the first time Opening the door Closing the door At the end of programmes with a drying phase (see “Programme chart”), the door will open automatically a little in order to help the drying process. This function can be deactivated, if preferred (see “Settings, AutoOpen”). Push the baskets right in. Then raise the door up, and push until it clicks into position. Danger of injury. Do not put your hand inside the door as it is closing. Pull the handle to open the door.
Before using for the first time Basic settings Time of day Open the door. The display will then change to the screen for setting the time. Switch the dishwasher on with the button. The welcome screen will appear when the dishwasher is switched on for the first time. Language The display will then change automatically to the screen for setting the language. Use the arrows to select the language you want and also the country, if applicable, and confirm your selection with OK.
Before using for the first time Water hardness The display will change to the screen for setting the water hardness. Finally, the information Miele@home enabled and Set up finished will appear in the display. – The dishwasher must be programmed to the correct water hardness for your area. After confirming these prompts with OK, the messages Add salt and Add rinse aid may appear. – Your local water authority will be able to advise you of the water hardness level in your area.
Before using for the first time Before using the machine for the first time, you will need: – approx. 2 litres of water, – approx. 2 kg dishwasher salt, – detergent for commercial dishwashers, – rinse aid for commercial dishwashers. Suitable products are available from Miele Professional. Every dishwasher is tested at the factory. There will be residual water in the machine from this test. It is not an indication that the dishwasher has been used previously.
Before using for the first time Filling the salt reservoir Important! Before filling the salt reservoir for the first time, you must fill it with approx. 2 litres of water to enable the salt to dissolve. Once the dishwasher has been used, there is always sufficient water in the reservoir. Remove the lower basket and unscrew the salt reservoir cap. Water or saline solution will run out of the reservoir when the cap is removed. It should therefore only be removed in order to refill the salt reservoir.
Before using for the first time Add salt reminder When Add salt appears in the display wait until the end of the programme and then refill the salt reservoir. Confirm with OK. The salt refill reminder will go out. Danger of corrosion! Run the Cold pre-wash programme immediately without a load in order to remove any traces of salt from the cabinet.
Before using for the first time Rinse aid Adding rinse aid Rinse aid is necessary to ensure water does not cling and leave marks on crockery during the drying phase, and helps crockery dry faster after it has been washed. Rinse aid is poured into the storage reservoir and the amount set is dispensed automatically. Fill the reservoir with rinse aid for commercial dishwashers only. Do not fill it with washing-up liquid or cleaning agent. This would damage the rinse aid reservoir.
Before using for the first time Rinse aid refill reminder When the Add rinse aid message appears, the reservoir contains sufficient rinse aid for 2 - 3 programmes only. Add rinse aid in plenty of time. Confirm with OK. The refill reminder will go out. Add rinse aid only until it is visible in the opening. The rinse aid reservoir holds approx. 110 ml. Close the flap firmly so that it clicks into place. Otherwise water can enter the rinse aid reservoir during a programme.
Loading the dishwasher Notes Remove coarse food residues from crockery. There is no need to rinse items under running water. Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dishwasher. These will damage to the dishwasher. Crockery can be loaded anywhere in the baskets, but the following notes should be observed: – Do not place crockery and cutlery inside other pieces where they may be concealed. – Make sure that small items cannot fall through the holders in the baskets.
Loading the dishwasher Items not suitable for dishwashers: Aluminium components (e.g. – Wooden cutlery and crockery or items with wooden parts: these may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. cooker hood grease filters) must not be cleaned with caustic alkaline commercial or industrial cleaning agents.
Loading the dishwasher FlexAssist Cup rack The yellow coded FlexAssist parts indicate which elements of the dishwasher baskets and cutlery tray are moveable. They also act as grips and have symbols embossed on them to show what the moveable parts are used for. Raise the rack upwards using the yellow lever to make room for tall items. Glasses can be arranged along the cup rack for support during the programme. Lower the cup rack and lean the glasses against it.
Loading the dishwasher Hinged spikes Jumbo cup rack (depending on model) The rows of spikes can be lowered to make more room for larger items such as casserole dishes. The cup rack can be set at two different widths so that it can also accommodate large cups. Press the yellow lever downwards and then lower the spikes . Pull the cup rack upwards and click it back into position at the required width.
Loading the dishwasher Glass rail Adjusting the height This rail is designed to hold tall glasses and stemware securely. You can set the glass rail at two different heights. Lower the rail with the yellow lever and lean tall glasses against it. Pull the rail upwards and click it back into position at the required height. You can also move one of the side inserts in the cutlery tray to make more room for tall glasses (see “Cutlery, 3D cutlery tray”).
Loading the dishwasher Adjusting the upper basket In order to gain more space for taller pieces of crockery in the lower or upper basket, the upper basket can be adjusted on three levels with 2 cm between each level. The upper basket can also be set at an angle with one side high and the other side low. This can be useful to help prevent water being left in deep dishes etc. Ensure, however, that the basket can be inserted smoothly into the cabinet. It is better to adjust the basket before loading it.
Loading the dishwasher Lower basket See “Loading the dishwasher, Loading examples” for examples of how to load crockery and cutlery. Use the lower basket for larger and heavier items such as plates, serving platters, saucepans, serving dishes, etc. Glasses, cups and small items such as saucers can also be placed in the lower basket. Removable MultiComfort insert The rear section of the lower basket is used for washing cups, glasses, plates and pots.
Loading the dishwasher FlexCare glass holder Glass rail Silicone padding in the FlexCare glass holder provides a stable and secure hold for delicate stemware. This rail is designed to hold tall glasses and stemware securely. Stemware, e.g. wine glasses, champagne flutes and beer glasses, can be leaned against the glass rack or suspended from it. The glass rack can be raised to make more room for tall items. You can set the glass rack at two different heights.
Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for washing plates, soup bowls, platters, dessert bowls, and saucers. The bottle holder can be used to wash narrow items, e.g. milk and baby bottles. Both rows of spikes can be lowered to make more room for large items, e.g. pots, pans and serving dishes. If the bottle holder is not needed, lift it up and fold the sides down , as illustrated. Press the yellow lever downwards , and then lower the spikes .
Loading the dishwasher Cutlery 3D+ cutlery tray See “Loading the dishwasher, Loading examples” for examples of how to load crockery and cutlery. Arrange the cutlery in the tray as shown. The upper spray arm must not be blocked by items which are too big (e.g. cake slices). The side sections of the tray can be moved into the middle using the yellow grips in order to accommodate tall items of crockery in the upper basket (see also “Upper basket, glass rail”).
Loading the dishwasher Both rows of spikes in the middle section of the cutlery tray can be flipped over to make room for larger pieces of cutlery. You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery, such as serving spoons and ladles. Raise the spikes and then flip them over .
Loading the dishwasher Loading examples Dishwashers with cutlery tray Upper basket Lower basket 38
Loading the dishwasher Cutlery tray Heavily soiled crockery 39
Operation Detergent Powder detergents Use powder detergent or dishwasher tabs only in the door dispenser compartment. Suitable products are available from Miele Professional. Tabs can be used. Only use tabs that are quick dissolving. Suitable tabs are available from Miele Professional. Add powder detergent or cleaning tabs to the detergent compartment. Detergent dosage Unless directed otherwise, use one tab or add 20 to 25 g of powder detergent to compartment II, depending on the level of soiling.
Operation Refilling or changing containers The DOS module is equipped with a level indicator. Refill detergent will appear in the display when the level drops below the minimum. As soon as the message appears in the display, refill or replace the container with a full one at the end of the programme. Confirm the message shown with the OK button. Replace the container in good time to prevent the dispensing system being emptied completely.
Operation Changing detergent If you want to change the detergent used, the system must first be rinsed through with water to avoid a reaction between the different detergents. Remove the siphon from the container and place it in a container of water. Start “Vent dispensing system” twice (see “Settings menu, External dispensing”) to rinse the system. Then place the siphon in the new container and start “Vent dispensing system” again. The dispensing system is ready for operation.
Operation Do not inhale or ingest powder detergent. Do not swallow dishwasher detergents. Dishwasher detergents can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or inhaled. Keep children away from detergents. Keep children away from the dishwasher when the door is open. Detergent residues could be present in the machine. Do not fill the detergent dispenser until just before starting the programme.
Operation Switching on Selecting a programme Open the stopcock, if it is closed. Choose your programme according to the type of load and how dirty it is. Open the door Make sure the spray arms can rotate freely. Press the button for at least 2 seconds. The programme selected will appear in the display briefly and the indicator light for the programme selected will come on. Then the display will show the estimated duration for the programme selected.
Operation Starting a programme Time display Start the programme by closing the door. The estimated duration of the programme selected appears the display before the programme begins. During the programme, the time left until the end of the programme is displayed. The programme will start. The In-operation indicator comes on to show that a programme has been started. A programme should only be cancelled in the first few minutes, if at all. Important programme stages could otherwise be omitted.
Operation Energy management Programme end To save energy the dishwasher will switch off automatically 10 minutes after the last time a button is pressed or after the end of a programme. At the end of a programme, the In-operation indicator light will be visible flashing slowly with the door shut. The buzzer might also be sounding. Press the button to switch the dishwasher back on. The programme has finished when Finished appears in the display and the door has opened slightly (if applicable).
Operation Switching off Interrupting a programme At the end of a programme: A programme is interrupted as soon as the door is opened. If the door is closed again, the programme will continue from the point it was at before the door was opened. Open the door. The dishwasher can be switched off at any time using the button. Switching the dishwasher off during a programme stops the programme. Switching the dishwasher off during the run-up to a delay start time (FlexiTimer) will also stop the process.
Programme options Options Countdown indicator Options can be selected and deselected using the appropriate buttons and the display before starting the programme. The Countdown indicator option is selected as standard and displays the time remaining until the end of the programme. Open the door. You can also switch to the Temperature while the programme is running. Switch the dishwasher on with the button. Temperature The indicator light next to the programme selected will come on.
Programme options FlexiTimer with EcoStart Open the door. With the FlexiTimer you have three options for starting the programme using Delay start. The start or finish time of a programme can be set. You also have the option of using the EcoStart function to benefit from cheaper rate energy tariffs. Switch on the dishwasher with the button. When using the FlexiTimer function, make sure that the detergent compartment is dry before adding detergent. Wipe dry with a cloth if necessary.
Programme options Start at Finish at With the Start at function, you set the exact time you want the programme to start at. With the Finish at function, you set the latest time at which you wish the programme to end. Use the arrows to set the hour and confirm with OK. Use the arrows to set the hour and confirm with OK. The hours will be saved and the minute number block will be highlighted. The hours will be saved and the minute number block will be highlighted.
Programme options EcoStart Changing or deleting set times The EcoStart function enables you to benefit from cheaper rate energy tariffs. To do this you need to set between one and three electrical tariff time zones once only (see “Settings menu, EcoStart”). Then set the time, by which the selected programme has to be finished by. The dishwasher will then start automatically in the most economical tariff zone within the time set.
Programme chart Programme When to use Detergent The following dosages are based on Miele products. Please follow manufacturer's instructions on dosage. Compartment I Compartment II For fresh, easily removed food residues. 20 - 25 g or 1 tab For normal, slightly dried food residues. 20 - 25 g or 1 tab Short 1) Universal For burnt-on, stubborn, dried-on food deposits Intensive containing starch or protein Special glassware programme.
Programme chart Programme sequence Pre-wash Main wash X 70 °C 30 s X 65 °C 10 min X 8 min X 75 °C 10 min X 50 °C 1 min X 52 °C 30 min X 10 min X 8 min X 50 °C 1 min X 60 °C 10 min Interim rinse I Interim rinse II X (X) (X) Drying Extra drying AutoOpen (X) 4) X 65 °C 10 s 10 s X Final rinse 2) 3) 15 min X (X) (X) 3) 3 min X (X) 65 °C 1.5 min 30 min X (X) (X) 3) 65 °C 1.
Programme chart Programme Consumption 6) Energy Duration 6) Water Cold water 15 °C Hot water 55 °C Cold water 15 °C Hot water 55 °C 1.5 kWh 1.0 kWh 14.5 l 25 min 1.5 kWh 1.0 kWh 15.2 l 39 min 1.7 kWh 1.0 kWh 20.2 l 55 min 1.0 kWh 0.4 kWh 15.2 l 25 min 0.941 kWh 0.6 kWh 13.8 l 216 min 207 min 1.2 kWh 0.5 kWh 20.2 l 87 min 81 min 1.9 kWh 1.2 kWh 20.2 l 0.02 kWh 0.02 kWh 5.
Cleaning and care Periodic checks To prolong the service life of the dishwasher, it should should be serviced at least once a year by Miele Service. This maintenance will cover the following: – Electrical safety according to national regulations (VDE 0701/0702 in Germany) Check the condition of your dishwasher regularly (approx. every 4 - 6 months). This way faults and problems can be avoided. All surfaces are susceptible to scratching.
Cleaning and care Cleaning the door and the door seal To avoid damaging the external surfaces, do not use: Mould could build up on the door seal and the sides of the dishwasher door as these surfaces are outside the wash cabinet and so not accessed and cleaned by the spray arm jets. – cleaning agents containing soda, ammonia, acids or chlorides, Wipe off any food or drink residues which may have dripped onto the sides and seals of the dishwasher door with a damp cloth before closing it.
Cleaning and care Checking the filters in the wash cabinet Cleaning the filters Switch the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution. This prevents soiling getting into the circulation system and re-entering the cabinet through the spray arms. The dishwasher must not be used without all the filters in place. Collection of coarse soil may cause the filters to clog.
Cleaning and care To clean the inside of the filter, the flap must be opened: Press catches together in the direction of the arrows as shown, and open the filter . Rinse all the filters under running water. Then close the flap so that the catch engages. 58 Replace the filter combination so that it lies flat in the base of the wash cabinet. Then turn the handle clockwise to lock the filter combination in place.
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be checked and cleaned regularly. Switch the dishwasher off. Remove the spray arms as follows: Take out the cutlery tray (if your dishwasher is fitted with one). Push the upper spray arm upwards to engage the inner ratchet. Then unscrew the spray arm. Push the middle spray arm upwards to engage the ratchet. Then unscrew the spray arm .
Problem solving guide With the help of the following guide, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the following: Repairs must only be carried out by a Miele technician or a Miele authorised service agent in accordance with local and national safety regulations.
Problem solving guide Problem Cause and remedy The door locking pins do not retract after the door has opened automatically. There is a fault with the door mechanism or the door has not been correctly balanced Call Miele Service. The dishwasher can only be used again with the AutoOpen function switched off. There is a danger of injury in the unlikely event of a fault with the opening mechanism.
Problem solving guide Problem Cause and remedy One of the following messages appears in the display: Before rectifying the problem: Switch the dishwasher off with the button. Fault FXX There may be a technical fault. After a few seconds: Switch the dishwasher back on. Select the programme you want. Close the door. If the fault message appears again, there is a technical fault. Call Miele Service. Waterproof The Waterproof system has reacted. Close the stopcock.
Problem solving guide Faults with water intake or drainage Problem Cause and remedy One of the following fault messages appears in the display: Open stopcock The stopcock is closed. Open the stopcock fully. Water intake Before rectifying the problem: Switch the dishwasher off with the button. The water intake is restricted. Open the stopcock fully and start the programme again. Clean the water inlet filter (see “Maintenance”). The water pressure at the intake is lower than 30 kPa (0.
Problem solving guide General problems Problem Cause and remedy The indicator lights and The display has switched off automatically to save the display are dark. energy. Switch the dishwasher on again with the button. The interior lighting The interior lighting has been switched off permandoes not come on when ently. the door is opened. Switch the lighting back on again (see “Settings menu, BrilliantLight”).
Problem solving guide Noises Problem Cause and remedy Knocking noise in the wash cabinet. A spray arm is knocking against an item in a basket. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the wash cabinet. Items are insecure in the wash cabinet. Interrupt the programme, and rearrange the load. A foreign object (e.g. a cherry stone) has become lodged in the drain pump.
Problem solving guide Unsatisfactory cleaning result Problem Cause and remedy The dishes are not clean. The dishes were not loaded correctly. See notes in “Loading the dishwasher”. The programme was not suitable for the load. Select a more suitable programme (see “Programme chart”). Not enough detergent was dispensed. Increase the dosage. The detergent used is not suitable for the type of soiling present. Change your detergent. Items are blocking the path of the spray arms.
Problem solving guide Problem Cause and remedy Dishes are not dry or cutlery and glasses are flecked. The rinse aid dosage is set too low or the rinse aid reservoir or container is empty. Replenish the reservoir, increase the dosage or change the brand of rinse aid (see “Before using for the first time, Rinse aid”). Crockery was taken out of the cabinet too soon. Leave it in for longer (see “Operation”). Glassware has a brown or blue tinge, and film cannot be wiped off.
Problem solving guide Problem Cause and remedy White residue is visible The rinse aid dosage is set too low. on the dishware. Cloud- Increase the dosage (see “Settings menu, Rinse ing occurs on glassaid”). ware and cutlery; film There is no salt in the salt reservoir. can be wiped off. Fill the salt reservoir (see “Before using for the first time - Dishwasher salt”). The salt reservoir cap has not been screwed on correctly. Replace it, making sure that it screws back on correctly.
Maintenance Cleaning the water inlet filter A filter is incorporated in the screw connection of the valve on the water inlet hose. The filter must be cleaned when dirty, otherwise insufficient water flows into the wash cabinet. The plastic housing of the water connection contains an electrical component. The housing must not be dipped in water. Recommendation Carefully remove the seal.
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the mains supply. Switch off at the mains socket and withdraw the plug. Take the filter combination out of the wash cabinet (see “Cleaning and care”, “Cleaning the filters”). Scoop the water out of the cabinet using a suitable container or utensil.
Customer service Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please quote the model and serial number of your dishwasher when contacting Miele. These can be found on the data plate along the right edge of the open door.
Optional accessories Accessories Some accessories may be supplied as standard, depending on model. Cappuccinatore insert The Cappuccinatore insert can be used for cleaning the individual parts of the Miele Cappuccinatore in the dishwasher. Cutlery basket The cutlery basket is placed in the lower basket and can be used to wash additional items of cutlery. Glass rail This rail is designed to hold glasses with stems securely in the lower basket.
Electrical connection UK Electrical connection All work on the electrical connection must be carried out by Miele, a Miele authorised technician or a qualified electrician. – In the UK it must comply with BS 7671. – The connection to the power supply must comply with national regulations (plug and socket must be accessible for service and maintenance work after the machine has been installed). An electrical safety test must be carried out after installation and after any service work.
Plumbing The Miele Waterproof system As long as your dishwasher has been installed correctly, the Miele waterproof anti-leak system will protect you from water damage throughout its lifetime. Water intake Water in the dishwasher must not be used as drinking water. – The dishwasher must be connected to the water supply in strict accordance with current local and national water authority regulations. – The water used must at least comply with national regulations for drinking water quality.
Plumbing To avoid any damage to the machine, the dishwasher must only be connected to a fully vented plumbing system. The inlet hose must not be shortened or damaged in any way as it contains electrical components (see illustration).
Plumbing Connecting the drain hose Venting the drainage system – The machine drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. If the on-site drain connection is situated lower than the guide path for the bottom basket rollers in the open door, the drainage system must be vented. Otherwise a siphoning effect during a programme can cause the machine to empty itself of water.
Technical data Dishwasher Model XXL PG 8133 SCVi Height - Free-standing model - Height built-in model 845 mm (adjustable + 65 mm) Niche height from 845 mm (adjustable + 65 mm) Width 598 mm Niche width 600 mm Depth freestanding model - Depth built-in model 570 mm Weight max. 57.5 kg Voltage Connected load Fuse rating See data plate Power consumption when switched off 0.3 W Power consumption when not switched off 2.5 W Network Standby 0.7 W Frequency band 2.412 - 2.
Settings menu Settings menu for changing standard settings Open the Settings menu Open the door. Switch the dishwasher on with the button if it is switched off. Open the Settings menu with the button. The first option in the Settings menu will appear in the display. See “Display” for more information about the display and controls. Use the arrow buttons underneath the display to select the option you want to change and confirm your selection with OK.
Settings menu Time of day Setting the time of day The dishwasher is delivered with the time of day (clock) display deactivated. You can set the time of day. The current time of day must be set before you can use the “FlexiTimer” programme option. To save energy the dishwasher will switch off automatically a few minutes after the last time a button is pressed or after the end of a programme. Setting the clock format You can select either a 24 hour or 12 hour clock. Select the Clock format option.
Settings menu Water hardness °d mmol/l °f Display 1 0.2 2 1 2 0.4 4 2 3 0.5 5 3 4 0.7 7 4 5 0.9 9 5 6 1.1 11 6 7 1.3 13 7 8 1.4 14 8 – Your local water authority will be able to advise you of the water hardness level in your area. 9 1.6 16 9 10 1.8 18 10 11 2.0 20 11 – Where the water hardness fluctuates e.g. between 3.1 and 4.5 mmol/l (17 25 °d - German scale) always programme the dishwasher to the higher value (4.5 mmol/l or 25 °d in this example). 12 2.
Settings menu Rinse aid External dispensing You can adjust the rinse aid dosage for best results. The dispenser can be set between 0 and 6 ml. 3 ml is set as standard. Activate automatic dispensing of liquid detergent if you have installed the optional external dosing module. The rinse aid dosage can turn out to be higher than the set value due to the automatic adjustment of the programme. If spots appear on crockery and glassware: – Increase the rinse aid dosage.
Settings menu DOS flow rate A flow rate of 60 ml/min is set as standard. The flow rate can be modified between 10 and 150 ml/min in increments of 5 ml/min. Set the dosage according to the cleaning agent manufacturer's recommendations. Choose the required detergent or flow rate quantities and confirm your selection with the OK button. The “Pre-wash” programme is offered directly after the venting process is finished.
Settings menu EcoStart Setting the electricity tariff times In order to run your dishwasher in the most economical way, you can use the EcoStart option to take advantage of your electricity supplier's time variable tariffs (see “Programme options, FlexiTimer with EcoStart”). With this option selected, your dishwasher will start automatically at your electricity supplier's cheapest tariff times. Before you can use the EcoStart option, you must set at least one electricity tariff time.
Settings menu Deleting the electricity tariff times You can delete the settings for a electricity tariff time and in doing so deactivate the EcoStart option for this time zone. Use the arrow buttons to select the electricity tariff time (T1 - T3) you want to delete and confirm with OK. For example, select Delete T1 and confirm with OK. For example, select Delete T1? and confirm with OK. The settings for the electricity tariff time selected will be reset. Confirm the message with OK.
Settings menu Networking MielePro@mobile app Your dishwasher is equipped with an integrated WiFi module. The MielePro@mobile App is available to download free of charge from the ® Apple App Store or from the Google Play Store. In order to connect your dishwasher to your WiFi network you must first activate the network function. This will add the Miele@home enabled option to the Settings menu. Networking is deactivated ex-works.
Settings menu WPS pushbutton SmartStart As an alternative to networking your dishwasher via the MielePro@mobile app we recommend using WPS (Wireless Protected Setup). To do so you will need a WPS-compatible router. The SmartStart function is used for starting your dishwasher automatically at a time when your energy costs are most economical. Select the WPS push button option. Please wait will appear in the display. Activate the “WPS” function on your router within two minutes.
Settings menu Remote control Once you have installed the MielePro@mobile app on your tablet PC or your smartphone, you will be able to operate your dishwasher remotely. Your dishwasher must be signed on to a WiFi network and the Remote control function must be activated. Select the setting you want and confirm with OK. Use the Back option to get into the Settings menu. If you now do not wish to operate the dishwasher remotely with the MielePro@mobile app, you can cancel the MobileControl function.
Settings menu Module settings We recommend connecting your dishwasher to your WiFi network with the help of the MielePro@mobile app or via WPS. If you would rather set up the connection to your router yourself, or you have a special network configuration, you can enter the relevant settings yourself if you have the necessary technical knowledge. Start module activity If you wish to reset all entered settings and values for Miele@home, you can restore the factory default settings on your WiFi module.
Settings menu 2nd interim rinse Volume You can increase the cleaning performance in the case of stubborn soiling by selecting a second interim rinse. This function is not available for all programmes (see “Programme chart”). A sequence of audible tones will sound at the end of the programme or if there is a fault as long as the buzzer has been activated. Select the setting you want and confirm with OK. Brightness There are seven different display brightness settings.
Settings menu Memory Refill indicators With the Memory function activated, the dishwasher will save the last programme used. When you switch the dishwasher off and back on again, the last programme used will appear in the display instead of the ECO programme. If you consistently use a multi-purpose Tab detergent you can deactivate the refill reminders for salt and rinse aid if you wish. Select the setting you want and confirm with OK.
Settings menu AutoOpen Optimise standby At the end of programmes with a drying phase (see “Programme chart”), the door will open automatically a little in order to help the drying process. With the ECO programme (if available) the door opens during the drying phase. The dishwasher is supplied with the Optimise standby function set as standard. This function can be deactivated if you wish. The dishwasher will not switch off in the event of a fault. Select the setting you want and confirm with OK.
Settings menu Showroom programme For demonstration purposes only. The dishwasher is equipped with various demo programmes for showroom use. – Demo mode Demonstration programme for showrooms – Demo with sound This programme activates the circulation pump to demonstrate the sound of the dishwasher. – Demo AutoOpen The door will open automatically. – Cont. BrilliantLight The interior lighting is on constantly.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Professional Sales, Tel: 0845 365 6608 E-mail: professional@miele.co.uk Internet: www.miele.co.uk/professional Malaysia Miele Sdn Bhd Suite 12-2, Level 12 Menara Sapura Kencana Petroleum Solaris Dutamas No. 1, Jalan Dutamas 1 50480 Kuala Lumpur, Malaysia Phone: +603-6209-0288 Fax: +603-6205-3768 Australia Miele Australia Pty. Ltd.