operating instructions

Depending on the Delay start setting, you can use the
Timer to set the time you wish a program to finish or start
at, or you can delay the start of the program.
To open the Timer sub-menu
Cottons Normal+
Low temp.
Duration 1:06 h
Low temp. B Timer Y Save Back A
HHHH
^
Use direct select button E Timer to open the Timer
sub-menu.
To select a delay start time
Cottons Normal+
Low temp.
10:00
Start time:
10:00
Finish:
11:06
^ Select the time required (in 30 minute steps) using the
multi-function selector, and confirm.
The start and finish times will now be postponed by the
time inputted. The maximum time that an automatic
program start can be delayed by is 24 hours.
To start the timer
^
Press the Start button.
The timer will count down in minutes until the start of the
program. If the delay start time selected is more than one
hour, the drum will turn briefly every hour to prevent
creasing.
To cancel the timer
^
Press direct select button G Cancel.
^
The program can now be started.
Timer
20