operating instructions

^
Pull the condenser (heat exchanger)
unit out of its housing by the handle
.
Checking the condenser unit (heat
exchanger unit)
^
Hold the condenser unit up to the
light as shown.
^
Check to see if there is any lint inside
it. The arrows in the illustration above
indicate where to look.
If you cannot see any lint:
^
Replace the condenser unit (see
following page).
If you can see some lint:
^
Clean the condenser unit as
described below.
To clean the condenser unit
^
Use a shower head or similar to rinse
the unit out as shown.
– From the sides.
–
From the front.
Lint is washed out by the water.
Cleaning and care
26