Installation Plan Washing Machine PWM 908 DP Always read the operating and installation instructions before setting up, installing, and commissioning the machine. This prevents both personal injury and damage to the machine.
Please have the model and serial number of your machine available when contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 www.mieleusa.com/professional prosales@mieleusa.com Technical Service & Support Phone: 800-991-9380 proservice@mieleusa.com Miele & Cie.
PWM 908 en-US Machine dimensions -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Installation -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Washer-dryer stack -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Installation -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Installation -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Machine dimensions -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Installation -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Washer-dryer stack -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Installation -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 en-US Installation -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PWM 908 Technical data Drum volume Capacity Door opening diameter Max. spin speed g-factor Residual moisture (standard load according to DIN 60456) en-US PWM 908 DP 19.3 gal 19.8 lb 11 13/16" 1,600 rpm 613 PWM 908 DP 73 l 9.0 kg 300 mm 1,600 rpm 613 48 % 48 % Electrical connection (EL) Standard voltage for CDN & USA Frequency Total rated load Fuse rating Power cord min.
PWM 908 Technical data en-US PWM 908 DP PWM 908 DP Installation on machine feet (F) No. of machine feet Machine foot, height-adjustable with thread Machine foot diameter 4 No. 4 No. +5/16" +8 mm 1.
PWM 908 en-US Installation and planning notes Installation requirements Cold water connection The machine should only be connected to a power supply provided in accordance with all appropriate local and national legislation and regulations. The washing machine should be connected to a domestic water supply in accordance with current local and national safety regulations.
PWM 908 en-US Connecting the drain hose to a sink drain outlet Interface The drain hose can be connected securely to a suitable sink drain outlet. The machine can be retrofitted with an XKM 3200 WL PLT communication module. This module can be used as a WiFi or LAN interface. The LAN interface provided via the module complies with SELV (Safety Extra Low Voltage) in accordance with EN 60950. Connected appliances must also comply with SELV.
