TVMini 2 User Guide Revision 1.
Table of contents Introduction and Overview of TVMini 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Introduction and System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Overview of TVMini 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction and Overview of TVMini 2 TVMini2™ User Guide Page 1
Introduction Thank you for choosing TVMini2™ from Miglia. TVMini2™ lets you watch, pause, rewind and skip forward live digital terrestrial TV on your Mac and enables you record TV shows straight to your hard drive. TVMini2™ supports the DVB-T standard, called Freeview in the UK and TNT in France System requirements: • Mac with built-in USB 2.0 connectivity • G4/1.5 GHz or faster, G5, Intel Core processor • 256 MB of RAM • 50 MB Free hard drive space. • Mac OS X 10.4.x, 10.5.
Overview of TVMini2 TVMini2 has a single connector at the back of the unit for the antenna connection. The front of the unit has a USB Type A connector.
Installing and using TVMini2 and The Tube software TVMini2™ User Guide Page 4
I. Connecting TVMini2 1. Connect TVMini2 to a free USB 2.0 port of your Mac. 2. Connect the mini-antenna to the antenna connector. Note: The mini-antenna will only work in areas where DVB-T reception is good. You should not have any difficulties receiving the full range of TV stations if you live in Germany or northern European countries. In the UK and France, it is strongly recommended to place the antenna near a window, as ‘indoor mobility’ is not yet implemented.
6. Once the installation is finished, you can quit the Installer and eject the CD-ROM. The Tube software will normally be located on your hard drive, in the Applications folder. III. Initial setup for The Tube 1. Double-click on the application The Tube located in the Applications folder. Make sure your TV Device is connected to the USB bus. 2. When required, please enter the software activation key located on the QuickStart Guide. You will most likely first have to create a user account 3.
4. Select your country in the Tuning panel and click on Auto-Tune. 5. Once the Auto-tune function has found channels, click OK and enjoy your new TV! For additional information on how to use The Tube software, please refer to the full The Tube user guide located on the CD-ROM.
Warranty Agreement Hardware Products: Miglia warrants your hardware product against any defect in material and workmanship, under normal use, for a period of 2 years. The warranty becomes effective from the date of purchase by the end user. If the product is found to be defective within the warranty period, Miglia will, at its sole option, repair or replace the defective product.
