Specifications

Chapter 3 - Instruction Set

*1 If I/O port is source operand, status on microcontroller pins is read

*2 If this instruction is executed on TMR register and if d=1, prescaler assigned to that timer will

automatically be cleared

*3 If PC was modified, or test result =1, instruction was executed in two cycles.

Previous page Table of contents Chapter overview Next page

http://www.mikroelektronika.co.yu/english/product/books/PICbook/3_Poglavlje.htm (4 of 4) [4/2/2003 16:18:03]