Product Manual

Milbank Manual Transfer Switch Owner’s and Installation Manual 17
SET UP
As each circuit breaker is turned on the LED display should be examined to verify that the loads are balanced,
within 2 LED’s illuminated in each side. The following gures show how the LED’s advances as the circuit
breakers are turned on. If the LED’s are not balanced then rewire the loads to balance the load on the
generator.
NORMAL OPERATION
As each circuit breaker is turned on the LED display
should be examined to verify that the loads are
balanced, within 2 LED’s illuminated on each side. The
following gures show how the LEDs advance as the
circuit breakers are turned on.
Figure 6 – Only A2 “On A2 & B2 “On
Figure 7 – A2, B2, A3& B3 Breakers with a balanced load A2, B2, A3, B3 A5/B5 Breakers with a balanced load