Product Manual

4 Milbank Manual Transfer Switch Owner’s and Installation Manual
INTRODUCTION
Thank you for your purchase of a Milbank Manual
Transfer Switch (MMTS). This product is designed for
use with portable generators. This Manual Transfer
Switch may have different installation requirements
depending on the generator manufacturer or design.
When operated and maintained according to the
instructions in this manual, your system will provide
many years of electrical energy service for utility
outages.
This Manual Transfer Switch requires professional
installation before use. Refer to the installation
section of this manual for instructions on installation
procedures. Only licensed electricians should install
the MMTS.
This manual contains important safety instructions for
installation and operation of this MMTS. Every effort
was made to provide safe, efcient instructions for
installation and operation. However, as all installations
are unique, it is impossible to anticipate every possible
procedure and method to achieve a properly installed
unit. It is important that you read and understand these
instructions thoroughly before attempting to install or
operate this unit. Your equipment is supplied with this
combined Owner’s and Installation Manual. This is an
important document and should be retained by the
owner after the installation has been completed. An
electronic version can be downloaded at milbankworks.
com.
Every effort has been made to ensure that the information
in this manual is both accurate and current; however,
the manufacturer reserves the right to change, alter or
otherwise improve the system at any time without prior
notice.
This User and Installation Guide describes how
to install, congure, and use the Milbank Manual
Transfer Switch (MMTS). This manual describes the
conguration, features, and operation of models
MMTS301SYS and MMTS501SYS. The MMTS301 and
MMTS501 is a reduced functionality unit that does not
include the power monitoring feature.
The instructions are to be used to properly install and
congure the Manual Transfer Switch to the home wiring
system. Installations must comply with all federal,
state and local codes, standards and regulations. Your
installer should follow these instructions completely.
This manual only covers the MMTS operation, the
portable generator manual is to be used for proper
operation of the generator.
CONTACT INFORMATION
There are several ways to contact us for answers to
questions you may have about your product. Please
contact Technical services by phone at (816) 410-
7346, Monday through Friday 8a.m. to 5 p.m, Central
Time. Electronic communication can be made through
our website milbankworks.com where you can
locate an authorized repair technician, or by email at
[e-mail].