Product Manual

8 Milbank Manual Transfer Switch Owner’s and Installation Manual
SAFETY
GENERAL SAFETY PRECAUTIONS
!
DANGER
DANGER! Equipment contains high voltage that can cause personal injury or
death.
Despite the safe design of the system, operating this equipment imprudently,
neglecting its maintenance or being careless can cause possible injury or
death.
NOTICE
Improper treatment of equipment can damage it and shorten its life.
• Use equipment only for intended uses.
• If you have questions about intended use, ask dealer or contact Milbank
Manufacturing.
• Do not expose equipment to excessive moisture, dust, dirt, or corrosive vapors.
• Remain alert at all times while working on this equipment. Never work on the
equipment when you are physically or mentally fatigued.
• If connected devices overheat, turn them off and turn off their circuit breaker/fuse.
Failure to properly ground equipment can result in electrocution.
• Do not touch bare wires.
• Do not use equipment with worn, frayed, bare or otherwise damaged
wiring.
• Do not handle electrical cords while standing in water, while barefoot, or while hands or
feet are wet.
• If you must work around a unit while it is operating, stand on an insulated dry surface to
reduce shock hazard.
• Do not allow unqualied persons or children to service equipment.
• In case of an accident caused by electrical shock, immediately shut down all sources of
electrical power and contact local authorities. Avoid direct contact with the victim.
WARNING