User's Manual

Chapter Two - 10
O
p
eratin
g
Shut down
Before shutting down, please always remember to save the unfinished
works and close the application for preventing from any possible data loss
or HDD damage.
“Shut down” will totally turn OFF the power of your notebook computer. If
you want to start your notebook computer again, you need to press the
power switch.
Sleep/ Hibernate
Sleep
Under “Sleep” mode, the system will temporarily save your work into RAM.
You are able to do enter “Sleep” mode by directly clicking from your OS.
Or, you can do the “Sleep” Mode settings in your OS. If you want to start
your notebook computer again, all you need to press any key.
Hibernate
Under “Hibernate” mode, the system will save your work into HDD. You
are able to do enter “Hibernate” mode by directly clicking from your OS. Or,
you can do the “Hibernate” Mode in your OS. If you want to start your
handheld computer again, you need to press the power switch.
Note:
 Standby/Hibernate/Resume works with both AC adapter an
d
battery. The power management functions may not work unde
r
non-ACPI operating systems.
 If you work under Windows 7 (64 bit) with external KB o
r
mouse, please do the Windows Setting as follows:
1. External Mouse: Device Manager
→ Mice and othe
r
pointing devices → HID- compliant → Power Managemen
t
→ Disable “Allow this device to wake the computer”
2. External KB: Device Manager → Keyboards → HID
-
compliant → Power Management → Disable “Allow thi
s
device to wake the computer”