Owner`s manual

OM-263 001 Page 13
SECTION 4 − SPECIFICATIONS
4-1. Introduction
The industrial series of fume extractors come fully assembled and pre-wired, and are designed to easily integrate with existing equipment. These con-
tinuous-duty extractors use downward airflow through the extractor housing to deliver high filtration efficiency while using less energy. The rectangular
filter packs, with proprietary filter media, can be pulse-cleaned on- or off-line. The industrial series fume extractors also include the following features:
 High-performance fan mounted in a separate compartment at the base of the unit for maximum noise control.
 Integrated electrical controls in a convenient location.
 Energy efficient filter packs with flame-retardant media.; tool-less serviceability.
 Zero-turn cleaning system with solenoid pilot valves and built-in exhaust silencer.
 Built-in airflow damper.
 Particle collection bin.
 Integrated controller with manual motor starter and 24 volt DC start/stop feedback relay.
Equipment options include cleaning controls (low-voltage feedback relay), premium efficiency motors, HEPA after-filters, spark management systems,
and top or front inlets.
4-2. Standard Equipment
Standard extractors include a fan, motor, control panel, 22 gal (83 L) particle collection bin, and an exhaust silencer and damper. The unit is fully as-
sembled and ready to connect to electrical and compressed air supplies, and building ductwork. A detailed drawing, shipped with each fume extractor,
provides weight, specifications, and unit dimensions.
 The models shown are repres-
entative of all units.
254 231-B
4-3. Serial Number And Rating Label Location
The serial number and rating information is located on the side of the unit. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.