Owner`s manual

OM-263 001 Page 18
1
! Only qualified persons should
install, operate, maintain, and
repair this unit.
! Installation must meet all Na-
tional, State, and Local Codes
− have only qualified persons
make this installation.
! Do not move or operate unit
where it could tip.
! Do not use this equipment to
support personnel, large
tools, or other material.
! Use only the supplied control
enclosures when installing
this unit.
! Be sure the floor or other
structural support will sup-
port the weight of the equip-
ment.
! Do not use equipment to sup-
port site-installed ducts, inter-
connecting piping, or electric-
al services. All ducts, piping,
or electrical services supplied
by others must be adequately
supported.
! Use only mounting hardware
specifically designed for the
structure or material support-
ing the equipment. Follow the
recommendations and install-
ation guidelines provided by
the manufacturer of the
mounting hardware.
The foundation must be able to sup-
port the entire weight of the unit, plus
the weight of the collected material,
piping, and ductwork.
1 Mounting Holes
Prepare the foundation in the selec-
ted location. Install 3/4 in. (19 mm) di-
ameter anchor bolts that extend a
minimum of 1-3/4 in. (44.5 mm)
above the foundation.
Secure the fume extractor at all
mounting hole locations.
5-4. Mounting The Equipment
1
Tools Needed:
254 231-B