Owner`s manual

OM-263 001 Page 34

SECTION 7 − USER SERVICING INSTRUCTIONS (MAINTENANCE)

7-1. Routine Maintenance

! Disconnect and lockout/tagout input power. Follow established procedures regarding the installation and removal of lockout/

tagout devices.

! Turn off compressed air supply and bleed air lines before servicing fume extractor. Bleed manifold air pressure to 0 psi (0 kPa).

 Service equipment more often if used in severe conditions.

 = Check  = Change  = Clean  = Replace

* To be done by Factory Authorized Service Agent

Daily

Section 7-3

 Pressure Drop At

Controller. Clean or replace

filter if necessary

 Condition of Extractor

Exhaust Air

 Extraction Ducts And

Tubing

 Particle Bin And

Empty If Necessary

Every

Month

 Outer Surfaces  Equipment Mounting

Hardware

 Drain moisture from

compressed air supply line.

Check filters on

compressed air supply line

 Cleaning valves,

solenoid valves, and tubing

for leaks

Every

Months

Section 7-2

 Unreadable Labels  Filter For Damage

Every

Months

 * Motor Bearing

Lubrication. Grease

Bearings Every 5500

Hours Of Operation.