Assembly & Installation Instruction

ASSEMBLY AND INSTALLATION
INSTRUCTION
CAUTION
Turn off the main power at the circuit breaker before installing the
fixture, in order to prevent possible shock. If you are unfamiliar with
proper electrical wiring connections, please consult of a qualified
electrician before installing.
Installing Step:
Remove the fixture and the mounting package from the box and make sure
that no parts missing in the box.
1. Put the arm to equal distribution
2.Thread the Loop (B) into fixture body(A) .
3. Put the Washer (C),Nipple (D) ,Cap (E) onto Fixture body (A), then tighten the finial
(F).
4. . Put the Glass (H),Fount (I) onto Socket (G), then tighten the Ring(J).
5.Install bulbs: (Bulbs not including in the package) .
(Please don’t exceed the maximum capacity that recommended on the
Sockets)
INSTALLATION IS NOW COMPLETED.
J
I
H
G
F
E
C
D
B
A
Please read carefully and save this instruction, as you may need them at a
later date.